LY2-0 DC48: Omron 48VDC 10A Relay in Chennai
Technical Specifications for Omron 48VDC 10A Relay LY2-0 DC48:
- Degree of protection: Closed type (cover)
- Terminal structure: PCB terminal
- Coil ratings: 48 VDC 18.5 mA
- Coil resistance: 2600 Ω
- Contact form: DPDT
- Contact method: Single
- Mounting method: Soldering
- Power consumption: Approx. 0.9 W
- Ambient temperature: -25 to 55 ℃
Omron 48VDC 10A Relay LY2-0 DC48 Technical Specifications:
| Degree of protection | Closed type (cover) |
| Terminal structure | PCB terminal |
| Coil ratings | 48 VDC 18.5 mA |
| Coil resistance | 2600 Ω |
| Operate voltage (Set voltage) | 80 % max. |
| Release voltage (Reset voltage) | 10% min. |
| Coil Maximum voltage | 110 % |
| Power consumption | Approx. 0.9 W |
| Coil Contact rated load | 110 VAC 10 A (Resistive load) 110 VAC 7.5 A (Inductive load (cosφ = 0.4)) 24 VDC 10 A (Resistive load) 24 VDC 5 A (Inductive load (L/R = 7 ms)) |
| Max. contact voltage | 250 VAC 125 VDC |
| Max. Contact Current | AC: 10 A DC: 10 A |
| Contact form | DPDT |
| Contact method | Single |
| Contact resistance | 50 mΩ max. (Voltage drop method with 5 VDC 1 A) |
| Contact material | Ag alloy |
| Operating time | 25 ms max. (With rated operating power applied, 23 ℃, not including contact bounce) |
| Reset time | 25 ms max. (With rated operating power applied, 23 ℃, not including contact bounce) |
| Maximum operating frequency | Mechanical: 18000 time/h Rated load: 1800 time/h |
| Insulation resistance | Between coil and contacts: 100 MΩ min. (at 500 VDC) Between contacts of the same polarity: 100 MΩ min. (at 500 VDC) Between contacts of different polarity: 100 MΩ min. (at 500 VDC) |
| Ambient temperature (Operating) | -25 to 55 ℃ (with no freezing or condensation) |
| Ambient humidity (Operating) | 5 to 85% RH |
| Mounting method | Soldering |
| Weight | Approx. 40 g |
Are you searching for the Omron 48VDC 10A Relay LY2-0 DC48. It’s a closed-type relay with PCB terminals and uses a 48 VDC coil at 18.5 mA. With a coil resistance of 2600 Ω, this DPDT relay with a single contact method is designed for soldering. It consumes about 0.9 W and works well in temperatures from -25 to 55 ℃. For competitive prices, IndMALL Automation in Chennai is the place to go.
