E2E-X2D2-U 2M: Omron M8 DC 2-Wire Proximity Sensor
Technical Specifications of Omron M8 DC 2-Wire Proximity Sensor E2E-X2D2-U 2M:
| Spec | Value |
|---|---|
| Sensing Head Size | M8 |
| Type | Shielded |
| Sensing Distance | 2 mm |
| Setting Distance | 0 to 1.6 mm |
Omron M8 DC 2-Wire Proximity Sensor E2E-X2D2-U 2M Technical Specifications:
| Specification | Value |
|---|---|
| Sensing head size | M8 |
| Type | Shielded |
| Cable specifications | PUR |
| Sensing distance | 2 mm |
| Setting distance | 0 to 1.6 mm |
| Pin arrangement | --- |
| Differential travel | 15% max. of sensing distance |
| Sensing object | Iron, 8 × 8 × 1 mm |
| Response frequency | 1.5 kHz |
| Connection method | Pre-wired Models (2 m) |
| Differential distance | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 10 and 11. |
| Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
| Control output (Load current) | 3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models |
| Control output (Residual voltage) | 3 V max. (Load current: 100 mA, Cable length: 2 m) |
| Indicator | D1 Models: Operation indicator (red) and setting indicator (green) D2 Models: Operation indicator (red) |
| Protective circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Operation mode | NC |
| Ambient temperature range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity range | 3 V max. (Load current: 100 mA, Cable length: 2 m) |
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Dielectric strength | 1000 VAC, 50/60 Hz for 1 minute between current carry parts and case |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Degree of protection | Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
| Material Clamping nuts | Nickel-plated brass |
| Material Toothed washer | Zinc-plated iron |
| Output Configuration | DC 2-Wire |
| Weight | Approx. 60 g |
Call us for Omron M8 DC 2-Wire Proximity Sensor, E2E-X2D2-U 2M at the best rates. Technical Attributes of E2E-X2D2-U 2M are 2 mm 0 to 1.6 mm ---. And It Delivers 15% max. of sensing distance, Iron, 8 × 8 × 1 mm, Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 10 and 11..Unlock Exclusive Pricing with a Quote for your requirement of Omron M8 DC 2-Wire Proximity Sensor. Trust in our ability to provide more advantageous pricing and dedicated support beyond other other Dealers.
