E2B-M12LS04-WP-C1 2M: Omron Inductive NPN Sensor
The technical specifications for the Omron Inductive NPN Sensor E2B-M12LS04-WP-C1 2M are as follows:
- Sensor Head diameter: M12
- Mounting : Flush | Shielded
- Sensing Distance: 4mm
- Body Length: Long Body (70mm)
- Output Configuration: NPN
- Operation Mode: NO
- Connection: Pre-Wired 2M Length
- Power Supply Voltage: 10 to 30 VDC
Omron Inductive NPN Sensor E2B-M12LS04-WP-C1 2M Technical Specifications:
| Sensor Head (Dia) | M12 (12mm) |
| Installation | Flush | Shield |
| Sensing Distance | 4mm |
| Body Length | Long (70 mm) |
| Output Configuration | NPN |
| Switching | NO |
| Connection | Pre Wired Cable, 2M Length |
| Differential travel | 10% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | 8 × 8 × 1 mm |
| Response frequency | 1,000 Hz |
| Power supply voltage | 10 to 30 VDC. (including 10% ripple (p-p)) |
| Current consumption | 10 mA max |
| Indicator | Operation indicator (Yellow LED) |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient air temperature | Operation and storage: -25 to 70ºC |
| Ambient humidity | Operation and Storage: 35 to 95% |
| Voltage influence | ±1% max. of sensing distance in 24 V ±15% |
| Standard and listings | (1) IP67 (IEC60529) (2) EMC (EN60947-5-2) |
| Material Case | Stainless steel (1.4305 (W.-No.), SUS 303 (AISI), 2346 (SS).) |
| Material Sensing surface | PBT |
| Material Cable | The standard cable is 4 mm dia. PVC |
| Material Clamping nut | Brass-nickel plated |
Omron Inductive NPN Sensor E2B-M12LS04-WP-B1 2M is a cylindrical sensor with an M12 (12mm) diameter, flush/shielded mounted. It boasts an inductive NPN sensor output and features an extended body length of 70 mm. Operating as Normally Open (NO), it is equipped with a convenient 2-meter pre-wired cable for easy installation.