REL-SR- 24DC/2X21/FG: 2908777 - Phoenix Safety Relay with Force-guided Contacts
Technical Specifications of Phoenix Safety Relay with Force-guided Contacts REL-SR- 24DC/2X21/FG 2908777:
| Spec | Value |
|---|---|
| Product Type | Single relay |
| Mechanical service life | approx. 107 cycles |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | - |
Phoenix Safety Relay with Force-guided Contacts REL-SR- 24DC/2X21/FG, 2908777 Technical Specifications:
| Specification | Value |
|---|---|
| Product type | Single relay |
| Mechanical service life | approx. 107 cycles |
| Insulation | Safe isolation, reinforced insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
| Service life electrical | - |
| Maximum power dissipation for nominal condition | 0.7 W |
| Test voltage (Winding/contact) | - |
| Test voltage (Changeover contact/changeover contact) | - |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 6 kV |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | - |
| Drive and function | monostable |
| Drive (polarity) | non-polarized |
| Typical input current at UN | 29 mA |
| Typical response time | 4 ms |
| Coil voltage | - |
| Status display | - |
| Contact switching type | 2 changeover contacts, forcibly actuated |
| Type of switch contact | Single contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 15 V |
| Limiting continuous current | 6 A |
| Maximum inrush current | 6 A |
| Min. switching current | 10 mA (5 V) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
| Connection method | Plug / solder connection |
| Width | 12.6 mm |
| Height | 29 mm |
| Depth | 25.5 mm |
| Degree of protection | IP20 |
| Degree of protection (Installation location) | - |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Standards/regulations | DIN EN 50178 |
| Mounting type | - |
| Mounting position | - |
| Mains frequency | - |
| Typical release time range | - |
| Coil resistance | - |
| Switching capacity | 2 A (24 V (DC13)) |
| Motor load according to UL 508 | 10 LRA / 0,5 FLA |
| Input power dissipation for UN | - |
| 3-phase motor load | - |
| Product family | - |
| Relay type | - |
| Test voltage () | - |
| Degree of protection (Relay) | - |
| Inrush current, minimum | - |
| Non-operate voltage | - |
| Safe operate voltage | - |
| Test voltage (N/O contact / N/O contact) | - |
Please speak to our Technical Engineer for Phoenix Safety Relay with Force-guided Contacts REL-SR- 24DC/2X21/FG part no: 2908777 at attractive prices. Technical Specs Summary of REL-SR- 24DC/2X21/FG, 2908777 includes mechanical service life of approx. 107 cycles, designed for demanding industrial applications. The sensor operates at a nominal input voltage of 24 V DC, with an input voltage range of -. The typical input current at UN is 29 mA with a response time of 10 ms. The sensor supports a maximum switching voltage of 250 V AC/DC, and a minimum switching voltage of 15 V. It has a limiting continuous current of 6 A, with a maximum inrush current of 6 A, and a minimum switching current of 10 mA (5 V). The interrupting rating for ohmic loads is 144 W (24 V DC). The connection method is via a Plug / solder connection, with a degree of protection rated at IP20. The sensor operates reliably in ambient temperatures ranging from -25 °C ... 70 °C. Match Your Needs with a Quote for your requirement of Phoenix Safety Relay with Force-guided Contacts. We lead with pricing that's more favorable and support that's more attentive than other Suppliers & Traders.
