PLC-RSC- 5DC/1/SSI: 1094759 - Phoenix 5VDC Nominal Input Voltage Relay
Technical Specifications of Phoenix 5VDC Nominal Input Voltage Relay PLC-RSC- 5DC/1/SSI 1094759:
| Spec | Value |
|---|---|
| Product type | Relay Module |
| Nominal input voltage UN | 5 V DC |
| Connection method | Screw connection |
| Mounting type | DIN rail mounting |
Phoenix 5VDC Nominal Input Voltage Relay PLC-RSC- 5DC/1/SSI, 1094759 Technical Specifications:
| Specification | Value |
|---|---|
| Product type | Relay Module |
| Product family | PLC-INTERFACE |
| Application | weak signal sources |
| Mechanical service life | 2x 107 cycles |
| Insulation | - |
| Overvoltage category | III |
| Pollution degree | - |
| Maximum power dissipation for nominal condition | 0.22 W |
| Test voltage (Winding/contact) | - |
| Test voltage (Changeover contact/changeover contact) | - |
| Rated surge voltage | - |
| Nominal input voltage UN | 5 V DC |
| Input voltage range | 4.5 V DC ... 6 V DC (20 °C) |
| Drive and function | monostable |
| Drive (polarity) | polarized |
| Typical input current at UN | 1 mA |
| Typical response time | 5 ms |
| Typical release time | 7 ms |
| Protective circuit | Reverse polarity protection |
| Operating voltage display | Yellow LED |
| Contact switching type | 1 N/O contact |
| Type of switch contact | Single contact |
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC |
| Limiting continuous current | 6 A |
| Maximum inrush current | 10 A (4 s) |
| Min. switching current | 10 mA |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| Switching capacity | - |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 26 ... 14 |
| Tightening torque | 0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing)) |
| Width | 6.2 mm |
| Height | 80 mm |
| depth | 94 mm |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | - |
| Degree of protection (Relay) | - |
| Degree of protection (Relay base) | IP20 (Relay base) |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Temperature | D |
| Humidity | A |
| Vibration | B/C |
| EMC | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Electromagnetic compatibility | Conformance with EMC directive |
| Standards/regulations | IEC 60947-5-1 |
| Mounting Type | DIN rail mounting |
| Mounting position | any |
| Contact Connection type | Power contact |
| Output fuse | 4 A gL/gG NEOZED |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Give Us a Call for Phoenix 5VDC Nominal Input Voltage Relay PLC-RSC- 5DC/1/SSI part no: 1094759 at the lowest pricing. In-depth Technical Analysis of PLC-RSC- 5DC/1/SSI, 1094759 feature Relay Module type and PLC-INTERFACE Product family a versatile solution for weak signal sources applications. This relay module features a mechanical service life of 2x 107 cycles, ensuring durability and reliability. With a maximum power dissipation of 0.22 W, it operates efficiently at a nominal input voltage of 5 V DC, within an input voltage range of 4.5 V DC ... 6 V DC (20 °C). The module has a typical input current of 1 mA at UN, with a response time of 5 ms and a release time of 7 ms. It is equipped with a Reverse polarity protection for protection and includes 1 N/O contact made from Screw connection Connection method. Elevate Your Project with a Quote for your requirement of Phoenix 5VDC Nominal Input Voltage Relay. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
