UR12.D50-IAMC.7BCU: 11704843 - Baumer 2m Cable Ultrasonic Sensor
Technical Specifications Baumer 2m Cable Ultrasonic Sensor UR12.D50-IAMC.7BCU 11704843:
| Spec | Value |
|---|---|
| Scanning range Sd | 15 … 500 mm |
| Scanning range close limit Sdc | 15 … 500 mm |
| Output circuit | Current output |
| Connection types | Cable 5 pin, 2 m |
Baumer 2m Cable Ultrasonic Sensor UR12.D50-IAMC.7BCU, 11704843 Technical Specifications:
| Specification | Value |
|---|---|
| Scanning range Sd | 15 … 500 mm |
| Scanning range close limit Sdc | 15 … 500 mm |
| Scanning range far limit Sde | 15 … 500 mm |
| Version | IO-Link dual channel, Multiplex version |
| Hysteresis typ. | 4 % Sde |
| Repeat accuracy | < 0.5 mm |
| Resolution | < 0.3 mm |
| Response time ton/toff standard | < 40 ms |
| Temperature drift | > 50 mm < 2 % of distance to target Sde, < 50 mm ± 1 mm |
| Power-up drift | Compensated after 15 min. |
| Sonic frequency | 290 kHz |
| Adjustment | line-Teach, IO-Link |
| Light indicator | LED yellow |
| Power on indication | LED green |
| Alignment measuring axis | < 2° |
| Voltage supply range +Vs | 12 … 30 VDC |
| Current consumption typ. | 35 mA |
| Output circuit | Current output |
| Baud rate | 38,4 kBaud (COM 2) |
| Output signal | 4 ... 20 mA / 20 ... 4 mA |
| Output current | 100 mA |
| Voltage drop Vd | <3 VDC |
| Residual ripple | < 10 % Vs |
| Short circuit protection | Yes |
| Reverse polarity protection | Yes, Vs to GND |
| Interface | IO-Link V1.1 |
| Cycle time | ≥ 8 ms |
| Process data length | 48 Bit |
| Design | Cylindrical threaded |
| Housing material | Brass nickel plated |
| Width / diameter | 12 mm |
| Height / length | 50 mm |
| Depth | |
| Connection types | Cable 5 pin, 2 m |
| Operating temperature | -25 … +65 °C |
| Storage temperature | -40 … +75 °C |
| Protection class | IP 67 |
Get A Quote for Baumer 2m Cable Ultrasonic Sensor UR12.D50-IAMC.7BCU part no: 11704843 at the best price. Here are the brief Technical Specifications of UR12.D50-IAMC.7BCU, 11704843 are scanning range of 15 … 500 mm with a resolution of less than < 0.3 mm and operates at a sonic frequency of 290 kHz. The adjustment options include line-Teach, IO-Link for flexible setup. It has a LED yellow light indicator for operational status and operates within a voltage supply range of 12 … 30 VDC, with a typical current consumption of 35 mA. The sensor uses a Current output circuit and is housed in a robust Cylindrical threaded design made of Brass nickel plated. Its compact dimensions include a width of 12 mm and a height of 50 mm. The connection is facilitated through an Cable 5 pin, 2 m. It's Time to get a Quote for your requirement of Baumer 2m Cable Ultrasonic Sensor. We guarantee unmatched pricing and unparalleled support compared to other Distributors.
