Omron E2E-X10D1-N 2M: 2 Wire Proximity Sensor in Chennai
The technical specifications for the Omron 2 Wire Proximity Sensor E2E-X10D1-N 2M are:
- Sensor Head (Dia): M30
- Installation: Flush | Shielded
- Sensing Distance: 10 mm
- Connection Method: Pre-wired Models (2 m)
- Cable Specifications: PVC (oil-resistant)
- Switching: NO
- Output Configuration: DC 2 Wire
- Power Supply Voltage: 12 to 24 VDC
Omron 2 Wire Proximity Sensor E2E-X10D1-N 2M Technical Specification:
Sensor Head (Dia) | M30 |
Installation | Flush | Shielded |
Sensing Distance | 10 mm |
Connection Method | Pre-wired Models(2 m) |
Cable Specifications | PVC (oil-resistant) |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 30 × 30 × 1 mm |
Response frequency | 0.4 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Omron E2E-X10D1-N 2M inductive sensor, featuring an M30 size and shielded design, can sensing distance 10 mm and comes as a pvc cable, pre-wired 2m length. It’s a DC 2 Wire Proximity Sensor with Normally Open (NO) configuration. For the best prices on this and other Omron Sensors, be sure to check out the great deals at IndMALL Automation in Chennai.