Omron E2E-X1R5E2 2M: M8 NPN NC Proximity Sensor | Indmall
+91 79955 44066 sales@indmall.in

Omron E2E-X1R5E2 2M: M8 NPN NC Proximity Sensor in Chennai

The technical specifications for the Omron M8 NPN NC Proximity Sensor E2E-X1R5E2 2M:

  • Sensor Head (Dia): M8
  • Installation: Flush | Shielded
  • Sensing Distance: 1.5 mm
  • Connection Method: Pre-wired Models
  • Cable Specifications: PVC (oil-resistant)
  • Switching: NC
  • Output Configuration: NPN, DC 3 Wire
  • Power Supply Voltage: 12 to 24 VDC

Omron M8 NPN NC Proximity Sensor E2E-X1R5E2 2M Technical Specification:

 

Sensor Head (Dia) M8
Installation Flush | Shielded
Sensing Distance 1.5 mm
Connection Method Pre-wired Models (2 m)
Cable Specifications PVC (oil-resistant)
Switching NC
Output Configuration NPN, DC 3 Wire
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object Iron, 8 ×  8 × 1 mm
Response frequency 2 KHz
Power supply voltage 12 to 24 VDC ripple (p-p) 10% max.
Leakage current 13 mA max
Indicator  Operation indicator (red)
Protection circuit Load short-circuit protection, Surge suppressor, Reverse polarity protection
Ambient air temperature Operating Storage: −40 to 85°C (with no icing or condensation)
Ambient humidity Operating/storage: 35% to 95% (with no condensation)
Voltage influence ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range
Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
Material Case Stainless steel (SUS303)
Material Sensing surface PBT

Looking for the Omron M8 NPN NC Proximity Sensor E2E-X1R5E2 2M in Chennai? You’ve found it. This sensor has an M8 head, flush shielded installation, 1.5 mm sensing distance, pre-wired models, oil-resistant PVC cable, Normally Closed (NC) switching, NPN DC 3 wire output, and works with 12-24 VDC power. It’s best for detecting ferrous metals, optimally sensing iron-sized 8 × 8 × 1 mm, with a 2 KHz response frequency. Get the best prices for this sensor at IndMALL Automation.