BJ7M-TDT-P: Autonics PNP Photoelectric Sensor
Technical Specifications of Autonics BJ7M-TDT-P:
| Spec | Value |
|---|---|
| Sensing Type | Through-beam type |
| Sensing Distance | 7m |
| Control Output | PNP open collector |
| Connection Type | Cable type(Ø3.5, 2m) |
Autonics PNP Photoelectric Sensor BJ7M-TDT-P Technical Specifications:
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 7m |
| Sensing target | Opaque material of min. Ø8mm |
| Light source | Red LED(650nm) |
| Response time | Max. 1ms |
| Power supply | 12-24VDC ±10%(ripple P-P: max. 10%) |
| Current consumption | Emitter/Receiver: Max. 20mA |
| Sensitivity adjustment | Sensitivity adjuster |
| Operation mode | Light ON/Dark ON(set by switch) |
| Control output | PNP open collector |
| Connection type | Cable type(Ø3.5, 2m) |
| Environment_Ambient illumination | Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
| Environment_Ambient temperature | -25 to 55℃, storage: -40 to 70℃ |
| Protection structure | IP65 |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Material | Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate, Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate |
| Weight | Approx. 115g (approx. 90g) |
Call us for Autonics PNP Photoelectric Sensor BJ7M-TDT-P at the best rates. Core System Specifications of BJ7M-TDT-P are Through-beam type, 7m Sensing Distance, Red LED(650nm) light source, 12-24VDC ±10%(ripple P-P: max. 10%) power supply, Emitter/Receiver: Max. 20mA current consumption, Light ON/Dark ON(set by switch), PNP open collector output, Cable type(Ø3.5, 2m), IP65 Protection structure. Don't Miss Out on a Quote for your requirement of Autonics PNP Photoelectric Sensor. Count on us for more economical pricing and more reliable support than other Dealers & Distributors.
