Autonics E40S6-1024-3-T-24: 24V Rotary Encoder
The technical specifications of Autonics 24V Rotary Encoder E40S6-1024-3-T-24:
- Shaft outer diameter: Ø6mm
- Resolution: 1024P/R
- Output phase: A, B, Z
- Control output: totem pole
- Power supply: 12-24VDC
- Connection type: cable type
- Max. response frequency: 300kHz
- Max. allowable revolution: 5000rpm
Original price was: ₹9,850.00.₹8,865.00Current price is: ₹8,865.00.
Out of stock
Autonics 24V Rotary Encoder E40S6-1024-3-T-24 Technical Specification:
| Type of Encoder | Diameter ø40mm shaft/hollow shaft/hollow built-in type of incremental rotary encoder |
| Shaft outer diameter | Ø6mm |
| Resolution | 1024P/R |
| Output phase | A, B, Z |
| Control output | Totem pole |
| Totem pole output | • Low – Load current: Max. 30mA, Residual voltage: Max. 0.4VDC • High – Load current: Max. 10mA, Output voltage(Power voltage 5VDC): Min. (Power voltage-2.0)VDC, Output voltage(Power voltage 12-24VDC): Min. (Power voltage-3.0)VDC |
| Response time (rise/fall) Totem pole output | Max. 1㎲ (cable length: 2m, I sink=20mA) |
| Current consumption | Max. 80mA(disconnection of the load), Line driver output: Max. 50mA(disconnection of the load) |
| Insulation resistance | Min. 100MΩ(at 500VDC megger between all terminals and case) |
| Dielectric strength | 750VAC 50/60Hz for 1 minute(Between all terminals and case) |
| Power supply | 12-24VDC ±5%(ripple P-P: max. 5%) |
| Connection type | Cable type |
| Protection structure | IP50 |
| Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Max. response frequency | 300kHz |
| Vibration | 1.5mm amplitude or 300m/s2 at a frequency of 10 to 55Hz(for 1 min.) in each of X, Y, and Z directions for 2 hours |
| Shock | Approx. Max. 50G |
| Max. allowable revolution | 5000rpm |
| Starting torque | Max. 40gf.cm(max. 0.00392N.m) |
| Accessories | Ø6mm coupling standard, Ø8mm coupling(sold separately) |
| Weight | Approx. 120g |
Are you in search of the Autonics E40S6-1024-3-T-24? This encoder features a 6mm shaft diameter, a high resolution of 1024P/R, up to 5000rpm with a maximum response frequency of 300kHz and a starting torque of max. 40gf.cm. It provides A, B, and Z output phases and has a totem pole control output, operating on a 12-24VDC power supply, comes with a radial cable connection, and is IP50-protected. IndMALL Automation ensures the best prices for this Autonics 24V Rotary Encoder.