Autonics ENC-1-3-T-24, Totem Pole Output Rotary Encoder
+91 79955 44066 sales@indmall.in
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Autonics ENC-1-3-T-24: Totem Pole Output Rotary Encoder

The Technical specifications of Autonics ENC-1-3-T-24 Totem Pole Output Rotary Encoder

  • Type of Encoder: Wheel type of incremental rotary encoder
  • Wheel Diameter: 250mm
  • Number of Pulses: 1
  • Output phase: A, B
  • Control output: Totem pole
  • Power supply: 12-24VDC
  • Connection type: Cable type
  • Max. response frequency: 180kHz
  • Protection structure: IP50

Original price was: ₹11,250.00.Current price is: ₹10,125.00.

Out of stock

Autonics ENC-1-3-T-24 Totem Pole Output Rotary Encoder Technical Specification:

 

 Type of Encoder Wheel type of incremental rotary encoder
 Wheel Diameter  250mm
 Gear ratio  4:1
 Number of Pulses  1
Min. measurement unit 1m
 Output phase  A, B
 Control output  Totem pole
Totem pole output • Low – Load current: Max. 30mA, Residual voltage: Max. 0.4VDC
• High – Load current: Max. 10mA,
Output voltage(Power voltage 5VDC) : Min. (Power voltage-2.0)VDC,
Output voltage(Power voltage 12-24VDC) : Min. (Power voltage-3.0)VDC
 Power supply 12-24VDC ±5%(ripple P-P: max. 5%)
 Connection type  Cable type
Vibration 1.5mm amplitude or 300m/s2 at a frequency of 10 to 55Hz(for 1 min.) in each of X, Y, and Z directions for 2 hours
Shock Approx. Max. 75G
Cable ø5, 5-wire, Length : 2m, Shield cable(Line driver output : ø5, 8-wire)
(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: ø1)
Current consumption Max. 80mA(disconnection of the load)
Insulation resistance
Min. 100MΩ(at 500VDC megger between all terminals and case)
Dielectric strength  750VAC 50/60Hz for 1 minute(Between all terminals and case)
 Protection structure IP50(IEC standard)
 Max. response frequency 180kHz
 Max. allowable revolution  5000rpm
Environment_Ambient temperature -10 to 70℃, storage: -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH
 Weight  Approx. 494g

Are you looking for the Autonics ENC-1-3-T-24 Totem Pole Output Rotary Encoder? This Wheel type of incremental rotary encoder has a high response frequency of 180kHz and can go up to 5000rpm, A and B output phases and has a 250mm wheel diameter with a 4:1 gear ratio, producing 1 pulse, operates on a 12-24VDC power supply, with an axial cable connection, is IP50 protected. For the best prices on Autonics Rotary Encoders, IndMALL Automation is your go-to source.

IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products