Autonics PR08-2DP2: PNP NC Inductive Sensor
The technical specifications for the Autonics PR08-2DP2 PNP NC Inductive Sensor:
- Sensing Distance: 2mm
- Sensing Side Diameter: M8
- Wire Type and Power: DC 3-wire, 12-24VDC
- Installation: Non-Flush
- Response Frequency: 1 kHz
- Control Output: PNP, Normally Closed
- Cable Standard/Material: Standard Cable
- Body Length: Standard Type
Autonics PR08-2DP2 PNP NC Inductive Sensor Technical Specification:
| Sensing Distance | 2 mm |
| Sensing side diameter | M8 |
| Wire type and power | DC 3-wire type 12-24VDC |
| Installation | Non-Flush |
| Standard sensing target | 8×8×1mm(iron) |
| Response frequency | 1 kHz |
| Current specification | Current consumption: Max. 10mA |
| Control output | PNP Normally Closed |
| Material | Case/Nut: Nikel plated Brass, (connector case of DIA. of sensing side Ø 8 mm: SUS303), washer: Nikel plated Iron, sensing side: polybutylene terephthalate, standard cable (black): polyvinyl chloride (PVC), oil resistant cable (gray): oil resistant polyvinyl chloride (PVC) |
| Cable Standard/material | Standard cable |
| Protection structure | IP67(IEC standard) |
| Body length | Standard type |
| Environment_Ambient temperature | -25 to 70℃, storage: -30 to 80℃ |
| Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Residual voltage | Max. 2V |
| Weight | Approx. 64g(approx. 52g) |
Looking for the Autonics PR08-2DP2, available at IndMALL Automation. This PNP NC Inductive Sensor detects objects 2 mm away, M8 Sensing side diameter, and works with a 12-24VDC, 3-wire system. This non-flush sensor is ideal for 8x8x1 mm iron targets, responds at 1 kHz, and uses a maximum of 10mA, made of durable nickel-plated brass and stainless steel, and comes with a standard PVC cable. Plus, it’s waterproof with an IP67 rating.