Autonics PR12-2DN: NO Inductive Sensor
The technical specifications for the Autonics PR12-2DN NO Inductive Sensor:
- Sensing Distance: 2mm
- Sensing Side Diameter: M12
- Wire Type and Power: AC 2-wire type 100-240VAC
- Installation: Flush
- Response Frequency: 1.5kHz
- Control Output: NPN Normally Open
- Cable Standard/material: Standard cable
- Body Length: Standard Type
Autonics PR12-2DN NO Inductive Sensor Technical Specification:
| Sensing Distance | 2 mm |
| Sensing side diameter | M12 |
| Wire type and power | AC 2-wire type 100-240VAC |
| Installation | Flush |
| Standard sensing target | 12×12×1mm(iron) |
| Response frequency | 1.5kHz |
| Current specification | Current consumption: Max. 10mA |
| Control output | NPN Normally Open |
| Material | Case/Nut: Nikel plated Brass, (connector case of DIA. of sensing side Ø 8 mm: SUS303), washer: Nikel plated Iron, sensing side: polybutylene terephthalate, standard cable (black): polyvinyl chloride (PVC), oil resistant cable (gray): oil-resistant polyvinyl chloride (PVC) |
| Cable Standard/material | Standard cable |
| Protection structure | IP67(IEC standard) |
| Body length | Standard type |
| Environment_Ambient temperature | -25 to 70℃, storage: -30 to 80℃ |
| Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Residual voltage | Max. 1.5V |
| Weight | Approx. 84g(approx. 72g) |
Are you searching for the Autonics PR12-2DN? This NO Inductive Sensor detects up to 2mm, fits M12 areas and uses AC 2-wire, 100-240VAC. Ideal for 12x12x1 mm iron, Body length is Standard type, it responds frequency at 20 Hz, Standard cable PVC, NPN output, is made of nickel-plated brass, and comes with a Flush. It’s IP67 waterproof. For detailed specifications, refer to the PR12-2DN datasheet. Get the Autonics PR12-2DN at IndMALL Automation for great prices. Choose us for all your PR12-2DN Autonics needs.