Autonics PR18-5DP: Inductive Sensor PNP
The technical specifications for the Autonics PR18-5DP Inductive Sensor PNP:
- Sensing Distance: 5 mm
- Sensing Side Diameter: M18
- Wire Type and Power: DC 3-wire type 12-24VDC
- Installation: Flush
- Response Frequency: 500 Hz
- Control Output: PNP Normally Open
- Cable Standard/material: Standard cable
- Body Length: Standard type
Autonics PR18-5DP Inductive Sensor PNP Technical Specification:
| Sensing Distance | 5 mm |
| Sensing side diameter | M18 |
| Wire type and power | DC 3-wire type 12-24VDC |
| Installation | Flush |
| Standard sensing target | 18×18×1mm(iron) |
| Response frequency | 500 Hz |
| Current specification | Current consumption: Max. 10mA |
| Control output | PNP Normally Open |
| Material | Case/Nut: Nikel plated Brass, (connector case of DIA. of sensing side Ø 8 mm: SUS303), washer: Nikel plated Iron, sensing side: polybutylene terephthalate, standard cable (black): polyvinyl chloride (PVC), oil resistant cable (gray): oil resistant polyvinyl chloride (PVC) |
| Cable Standard/material | Standard cable |
| Protection structure | IP67(IEC standard) |
| Body length | Standard type |
| Environment_Ambient temperature | -25 to 70℃, storage: -30 to 80℃ |
| Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Residual voltage | Max. 1.5 V |
| Weight | Approx. 122g(approx. 110g) |
Looking for the Autonics PR18-5DP Proximity Sensor. This Inductive Sensor PNP, a 5 mm sensing distance with an M18 flush installation, DC 3-wire type at 12-24VDC, is designed for an 18×18×1mm iron target, Nikel plated Brass case/nut, polybutylene terephthalate sensing side, and various cable options, has a response frequency of 500 Hz and current consumption of Max. 10mA, Normally Open control output and IP67 protection, ensures reliable performance. For competitive Autonics proximity sensor prices, check IndMALL Automation for exclusive offers on Inductive Sensors.