HMG10P-T - SSI: Baumer Singleturn Multiturn 20 bit Absolute Encoder
Technical Specifications of Baumer Singleturn Multiturn 20 bit Absolute Encoder HMG10P-T - SSI:
Spec | Value |
---|---|
Voltage Supply | 4.75...30 VDC |
Sensing Method | Magnetic |
Switching Outputs | 1 output (Open collector, solid state relay on request) |
Connection | Terminal box, Flange connector M23 |
Baumer Singleturn Multiturn 20 bit Absolute Encoder HMG10P-T - SSI Technical Specifications:
Specification | Value |
---|---|
Voltage supply | 4.75...30 VDC |
Short-circuit proof | Yes |
Consumption w/o load | ≤100 mA (SSI) |
Initializing time | ≤500 ms after power on |
Interface | SSI |
Function | |
Transmission rate | |
Device adress | |
Steps per revolution | 1048576 / 20 bit |
Number of revolutions | 1048576 / 20 bit |
Additional outputs | Square-wave TTL/HTL,TTL/RS422 |
Sensing method | Magnetic |
Programmable parameters | Resolution singleturn and multiturn (SSI), binary or gray code (SSI), additional output (no. of pulses), switch-off and switch-on speeds |
Diagnostic function | Function control |
Status indicator | 4 LEDs in device back side |
Switching accuracy | ± 2 % (or 1 Digit) |
Switching outputs | 1 output (Open collector, solid state relay on request) |
Output switching capacity | 30 VDC; ≤100 mA |
Switching delay time | ≤20 ms |
Size (flange) | ø105 mm |
Shaft type | ø16...20 mm (through hollow shaft) |
Flange | Support plate, 360° freely positionable |
Protection EN 60529 | IP 66 / IP 67 |
Operating speed | ≤12000 rpm |
Range of switching speed | ns (off) = ±2...12000 rpm, factory setting 6000 rpm |
Operating torque typ. | 10 Ncm |
Rotor moment of inertia | 950 gcm² |
Admitted shaft load | ≤450 N axial, ≤650 N radial |
Material | Housing: aluminium alloy, Shaft: stainless steel |
Corrosion protection | IEC 60068-2-52 Salt mist, for ambient conditions CX (C5-M) according to ISO 12944-2 |
Operating temperature | -40...+95 °C |
Relative humidity | 95 % non-condensing |
Resistance | IEC 60068-2-6, Vibration 30 g, 10-2000 Hz, IEC 60068-2-27, Shock 400 g, 1 ms |
Weight approx. | 1.6 kg (depending on version) |
Connection | Terminal box, Flange connector M23 |
Pulses per revolution |
Get A Quote for Baumer Singleturn Multiturn 20 bit Absolute Encoder HMG10P-T - SSI at the best price. Here are the brief Technical Specifications of HMG10P-T - SSI, are voltage supply of 4.75...30 VDC and consumption of ≤100 mA (SSI) without load. These encoders feature a fast initializing time of ≤500 ms after power on, ensuring quick setup. The Magnetic sensing method guarantees precise performance, with 1 output (Open collector, solid state relay on request). The output switching capacity is 30 VDC; ≤100 mA. The operating speed reaches up to ≤12000 rpm, with a switching speed range of ns (off) = ±2...12000 rpm, factory setting 6000 rpm. The Housing: aluminium alloy, Shaft: stainless steel shaft for added strength. Connections include a Terminal box, Flange connector M23 outputs. It's Time to get a Quote for your requirement of Baumer Singleturn Multiturn 20 bit Absolute Encoder. We guarantee unmatched pricing and unparalleled support compared to other Distributors.