ITD 70 A 4 Y 7: N/A - Baumer Thalheim Encoder
Technical Specifications of Baumer Thalheim Encoder ITD 70 A 4 Y 7:
| Spec | Value |
|---|---|
| Voltage supply | 5 VDC ±5 %, 8...30 VDC |
| Sensing method | Optical |
| Size (flange) | ø150 mm |
| Connection | Cable 1 m |
Baumer Thalheim Encoder ITD 70 A 4 Y 7 N/A Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 5 VDC ±5 %, 8...30 VDC |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 1000 … 2500 |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Output frequency | ≤120 kHz |
| Output signals | A, B, N + inverted |
| Output stages | TTL linedriver (short-circuit proof), HTL push-pull (short-circuit proof) |
| Size (flange) | ø150 mm |
| Shaft type | ø40...65 mm (through hollow shaft) |
| Protection EN 60529 | IP 54 |
| Operating speed | ≤4000 rpm |
| Material | Housing: aluminium, black, powder-coated, Shaft: stainless steel |
| Operating temperature | -20...+70 °C |
| Relative humidity | 90 % non-condensing |
| Resistance | EN 60068-2-6, Vibration 10 g, 55-2000 Hz, EN 60068-2-27, Shock 100 g, 11 ms |
| Connection | Cable 1 m |
| Weight approx. | 2900 g |
Ask for the Pricing of Baumer Thalheim Encoder ITD 70 A 4 Y 7 at unbeatable prices. Detailed Specifications of ITD 70 A 4 Y 7, feature voltage supply of 5 VDC ±5 %, 8...30 VDC and a low power consumption of ≤100 mA without load. These encoders use Optical sensing for accurate measurement and provide output frequencies of ≤120 kHz. The available output stages include TTL linedriver (short-circuit proof), HTL push-pull (short-circuit proof). The encoders feature a ø150 mm flange size and operate at speeds of up to ≤4000 rpm. The Housing: aluminium, black, powder-coated, Shaft: stainless steel. Connection options include Cable 1 m. The approximate weight is 2900 g. Now's the Time to Secure a Quote for your requirement of Baumer Thalheim Encoder. We're committed to offering more favorable pricing and more responsive support than other Traders.
