optoPulse EIL580-T - Option 6301: Baumer Aluminium Die-cast Encoder
Technical Specifications of Baumer Aluminium Die-cast Encoder optoPulse EIL580-T - Option 6301:
| Spec | Value |
|---|---|
| Voltage supply | 5 VDC ±5 %, 8...30 VDC, 4.75...30 VDC |
| Sensing method | Optical |
| Size (flange) | ø58 mm |
| Connection | Flange connector M12, 8-pin, Flange connector M23, 12-pin, Cable |
Baumer Aluminium Die-cast Encoder optoPulse EIL580-T - Option 6301 Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 5 VDC ±5 %, 8...30 VDC, 4.75...30 VDC |
| Consumption w/o load | ≤70 mA |
| Pulses per revolution | 100 … 5000 |
| Phase shift | 90 ° ±10° |
| Duty cycle | 40…60 % |
| Reference signal | Zero pulse, width 90° ±10 % |
| Sensing method | Optical |
| Output frequency | ≤300 kHz (TTL), ≤160 kHz (HTL) |
| Output signals | A+, B+, R+, A-, B-, R- |
| Output stages | TTL/RS422, HTL/push-pull |
| Size (flange) | ø58 mm |
| Shaft type | ø8...15 mm (through hollow shaft), ø9.52 mm (through hollow shaft), ø12.7 mm (through hollow shaft) |
| Protection EN 60529 | IP 65 (without shaft seal), IP 67 (with shaft seal) |
| Operating speed | ≤3000 rpm (+20 °C, IP 67), ≤6000 rpm (+20 °C, IP 65) |
| Starting torque | ≤0.025 Nm (+20 °C, IP 65), ≤0.03 Nm (+20 °C, IP 67) |
| Material | Housing: aluminium die-cast, Flange: aluminium |
| Operating temperature | -40...+85 °C |
| Relative humidity | 90 % non-condensing |
| Resistance | EN 60068-2-6, Vibration 30 g, 10-2000 Hz, EN 60068-2-27, Shock 250 g, 6 ms |
| Connection | Flange connector M12, 8-pin, Flange connector M23, 12-pin, Cable |
| Weight approx. | 300 g |
Give Us a Call for Baumer Aluminium Die-cast Encoder optoPulse EIL580-T - Option 6301 at the lowest pricing. In-depth Technical Analysis of optoPulse EIL580-T - Option 6301 feature voltage supply of 5 VDC ±5 %, 8...30 VDC, 4.75...30 VDC and a low power consumption of ≤70 mA without load. These encoders use Optical sensing for accurate measurement and provide output frequencies of ≤300 kHz (TTL), ≤160 kHz (HTL). The available output stages include TTL/RS422, HTL/push-pull. The encoders feature a ø58 mm flange size and operate at speeds of up to ≤3000 rpm (+20 °C, IP 67), ≤6000 rpm (+20 °C, IP 65). The Housing: aluminium die-cast, Flange: aluminium. Connection options include Flange connector M12, 8-pin, Flange connector M23, 12-pin, Cable. The approximate weight is 300 g. Elevate Your Project with a Quote for your requirement of Baumer Aluminium Die-cast Encoder. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
