PMG10P - SSI: Baumer Rotating Direction Input Signals Absolute Encoder
Technical Specifications of Baumer Rotating Direction Input Signals Absolute Encoder PMG10P - SSI:
| Spec | Value |
|---|---|
| Voltage Supply | 4.75...30 VDC |
| Sensing Method | Magnetic |
| Switching Outputs | 1 output (Open collector, solid state relay on request) |
| Connection | Terminal box, Flange connector M23 |
Baumer Rotating Direction Input Signals Absolute Encoder PMG10P - SSI Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤100 mA (SSI) |
| Initializing time | ≤500 ms after power on |
| Interface | SSI |
| Function | |
| Transmission rate | |
| Device adress | |
| Steps per revolution | 1048576 / 20 bit |
| Number of revolutions | 1048576 / 20 bit |
| Additional outputs | Square-wave TTL/HTL,TTL/RS422 |
| Sensing method | Magnetic |
| Programmable parameters | Resolution singleturn and multiturn (SSI), binary or gray code (SSI), additional output (no. of pulses), switch-off and switch-on speeds |
| Diagnostic function | Function control |
| Status indicator | 4 LEDs in device back side |
| Switching accuracy | ± 2 % (or 1 Digit) |
| Switching outputs | 1 output (Open collector, solid state relay on request) |
| Output switching capacity | 30 VDC; ≤100 mA |
| Switching delay time | ≤20 ms |
| Size (flange) | ø115 mm |
| Shaft type | ø11 mm solid shaft |
| Flange | EURO flange B10, Housing foot B3 |
| Protection EN 60529 | IP 66 / IP 67 |
| Operating speed | ≤12000 rpm |
| Range of switching speed | ns (off) = ±2...12000 rpm, factory setting 6000 rpm |
| Operating torque typ. | 10 Ncm |
| Rotor moment of inertia | 1 kgcm² |
| Admitted shaft load | ≤450 N axial, ≤650 N radial |
| Material | Housing: aluminium alloy, Shaft: stainless steel |
| Corrosion protection | IEC 60068-2-52 Salt mist, for ambient conditions CX (C5-M) according to ISO 12944-2 |
| Operating temperature | -40...+95 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | IEC 60068-2-6, Vibration 30 g, 10-2000 Hz, IEC 60068-2-27, Shock 400 g, 1 ms |
| Weight approx. | 1.9 kg (depending on version) |
| Connection | Terminal box, Flange connector M23 |
| Pulses per revolution |
Talk to Our Engineer for Baumer Rotating Direction Input Signals Absolute Encoder PMG10P - SSI with exclusive offers. Core System Specifications of PMG10P - SSI, are voltage supply of 4.75...30 VDC and consumption of ≤100 mA (SSI) without load. These encoders feature a fast initializing time of ≤500 ms after power on, ensuring quick setup. The Magnetic sensing method guarantees precise performance, with 1 output (Open collector, solid state relay on request). The output switching capacity is 30 VDC; ≤100 mA. The operating speed reaches up to ≤12000 rpm, with a switching speed range of ns (off) = ±2...12000 rpm, factory setting 6000 rpm. The Housing: aluminium alloy, Shaft: stainless steel shaft for added strength. Connections include a Terminal box, Flange connector M23 outputs. Don't Miss Out on a Quote for your requirement of Baumer Rotating Direction Input Signals Absolute Encoder. Count on us for more economical pricing and more reliable support than other Dealers & Distributors.
