UR18.DA0.2-UAMJ.9SF: 11200639 - Baumer M12 5 Pin Connector Sensor
Technical Specifications Baumer M12 5 Pin Connector Sensor UR18.DA0.2-UAMJ.9SF 11200639:
| Spec | Value |
|---|---|
| Scanning range Sd | 20 … 1000 mm |
| Scanning range close limit Sdc | 20 … 1000 mm |
| Output circuit | Voltage output |
| Connection types | Connector M12 5 pin |
Baumer M12 5 Pin Connector Sensor UR18.DA0.2-UAMJ.9SF, 11200639 Technical Specifications:
| Specification | Value |
|---|---|
| Scanning range Sd | 20 … 1000 mm |
| Scanning range close limit Sdc | 20 … 1000 mm |
| Scanning range far limit Sde | 20 … 1000 mm |
| Version | IO-Link dual channel, Multiplex version |
| Hysteresis typ. | 4 % Sde |
| Repeat accuracy | 0.5 mm |
| Resolution | < 0.3 mm |
| Temperature drift | > 50 mm < 2 % of distance to target Sde |
| Power-up drift | Compensated after 15 min. |
| Sonic frequency | 200 kHz |
| Adjustment | qTeach, line-Teach, IO-Link |
| Light indicator | LED yellow |
| Power on indication | LED green |
| Alignment measuring axis | < 2° |
| Voltage supply range +Vs | 12 … 30 VDC |
| Current consumption typ. | 35 mA |
| Output circuit | Voltage output |
| Baud rate | 38.4 kBaud (COM 2) |
| Output signal | 0 ... 10 V / 10 ... 0 V |
| Output current | 100 mA |
| Voltage drop Vd | <3.5 VDC |
| Residual ripple | < 10 % Vs |
| Short circuit protection | Yes |
| Reverse polarity protection | Yes, Vs to GND |
| Interface | IO-Link V1.1 |
| Cycle time | ≥ 12 ms |
| Process data length | 48 Bit |
| Design | Cylindrical threaded |
| Housing material | Stainless steel (V2A) / TR90 |
| Width / diameter | 18 mm |
| Height / length | 64 mm |
| Connection types | Connector M12 5 pin |
| Operating temperature | -25 … +65 °C |
| Storage temperature | -40 … +75 °C |
| Protection class | IP 69 |
Call us for Baumer M12 5 Pin Connector Sensor UR18.DA0.2-UAMJ.9SF part no: 11200639 at the best rates. Technical Attributes of UR18.DA0.2-UAMJ.9SF, 11200639 are scanning range of 20 … 1000 mm with a resolution of less than < 0.3 mm and operates at a sonic frequency of 200 kHz. The adjustment options include qTeach, line-Teach, IO-Link for flexible setup. It has a LED yellow light indicator for operational status and operates within a voltage supply range of 12 … 30 VDC, with a typical current consumption of 35 mA. The sensor uses a Voltage output circuit and is housed in a robust Cylindrical threaded design made of Stainless steel (V2A) / TR90. Its compact dimensions include a width of 18 mm and a height of 64 mm. The connection is facilitated through an Connector M12 5 pin. Unlock Exclusive Pricing with a Quote for your requirement of Baumer M12 5 Pin Connector Sensor. Trust in our ability to provide more advantageous pricing and dedicated support beyond other other Dealers.
