RTU-EN01 | DVP DeviceNet Remote I/O Module | IndMALL
+91 79955 44066 sales@indmall.in

Home / Products / PLC / Delta / RTU-EN01

RTU-EN01: DVP DeviceNet Remote I/O Module

Delta RTU-EN01
Datasheet

The Technical Specifications of Delta DVP Remote I/O Module RTU-DNET:

  • Transmission method: CAN
  • Connector: Removable, 5.08mm
  • Message type: Explicit, I/O polled
  • Serial baudrate: 125k, 250k, 500k bps
  • Network voltage: 24 VDC (11 to 25 VDC)
  • Supports: DeviceNet protocol
  • Max. baudrate: 500k bps
  • connectable: DVP-S series I/O modules

DVP DeviceNet Remote I/O Module RTU-EN01 Technical Specifications:

 

Transmission method IEEE 802.3, IEEE 802.3u
Transmission interface RJ-45 MDI/MDIX, no jumper cable required
Baudrate 10/100M bps, auto-detection
Network protocols ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, HTTP
Power supply voltage 24 VDC (-15 to 20%)
Power consumption 2 W
Insulation voltage 500 V
Transmission method RS-485
Connector Removable
Serial baudrate 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
Data type Modbus ASCII/RTU
Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line:±2KV, Digital Input: ±2KV,
Communication I/O: ±2KV
RS (IEC 61131-2, IEC 61000-4-3): 80MHz ~ 100MHz, 10V/m. 1.4GHz ~ 2.0GHz, 10V/m
Conducted Susceptibility Test (EN61000-4-6, IEC61131-2 9.10): 150kHz ~ 80MHz, 3V/m
Surge Test (Biwave IEC61132-2, IEC61000-4-5): Power line 0.5KV DM, Ethernet 0.5KV
CM, RS-485 0.5KV CM
Storage /Operation Temperature Storage: -25ºC ~70ºC (temperature)
Operation: 0ºC ~55ºC (temperature)
Storage /Operation humidity 5%~95% (humidity)
5%~95% (humidity); pollution degree 2
Vibration/shock immunity International standards: IEC61131-2, IEC68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)

Looking for the DVP DeviceNet Remote I/O Module RTU-EN01. It communicates using standard internet protocols and connects easily with an RJ-45 connector, no special cables are needed. It automatically adjusts to 10/100M bps speeds and supports a wide range of network protocols. Running on 24 VDC power, it only uses 2W and is insulated up to 500V. The module also includes an RS-485 interface for reliable serial communication across various speeds, supporting Modbus ASCII/RTU data types. For competitive Delta PLC prices, check out IndMALL Automation.