E2A-M12KN08-WP-B1 2M: Omron Proximity Sensor Cable
The Omron Proximity Sensor Cable E2A-M12KN08-WP-B1 2M Technical Specifications:
- Sensor Head: M12
- Mounting Type: Non-Flush/Non-shielded
- Sensing Distance: 8 mm
- Output Type: PNP
- Switching: NO
- Power Source: DC, 3-wire
- Connection Method: Pre-wired
- Material Housing: Brass
Omron Proximity Sensor Cable E2A-M12KN08-WP-B1 2M Technical Specifications:
| Sensor Head | M12 |
| Mounting type | Non-Flush |
| Sensing Distance | 8 mm |
| Output type | PNP |
| Switching | NO |
| Power source | DC 3-wire |
| Connection method | Pre Wired, Cable Length 2M |
| Barrel Length | Short body |
| Differential travel | Differential travel 10% max. of sensing distance |
| Voltage influence | ±1% max. of sensing distance in rated voltage range ±15% |
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current carry parts and case |
| Overall Length | 50 mm |
| Thread Length | 34 mm |
| Ambient humidity | Operating: 35% to 95%, Storage: 35% to 95% |
| Supply Voltage | 12-24 VDC |
| Operating temperature | -40…70°C |
| Switching frequency | 800Hz |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Degree of protection | IP67 |
| Ambient air temperature | Operating: −40°C to 70°C, Storage: −40°C to 85°C (with no icing or condensation) |
| Material housing | Brass |
Looking for the Omron E2A-M12KN08-WP-B1 2M Proximity Sensor? This Omron Proximity Sensor Cable, with an M12 head, is designed for non-flush, non-shielded mounting. It senses objects up to 8 mm and works with a DC power source through a 3-wire system, PNP output, and Normally Open (NO) switching, pre-wired connection, housed in brass, measuring 50 mm in length with a 34 mm threaded section. Check out IndMALL Automation for the best deals on this proximity sensor.
