E2A-M12LS04-M1-C1: Omron Proximity Sensor NPN
The Technical specifications of Omron Proximity Sensor NPN E2A-M12LS04-M1-C1:
- Sensor Head: M12
- Mounting type: Flush/Shielded
- Sensing Distance: 4 mm
- Output type: NPN
- Switching: NO
- Power source: DC 3-wire
- Connection method: M12 connector
- Material housing: Brass
Omron Proximity Sensor NPN E2A-M12LS04-M1-C1 Technical Specifications:
| Sensor Head | M12 |
| Mounting type | Flush |
| Sensing Distance | 4 mm |
| Output type | NPN |
| Switching | NO |
| Power source | DC 3-wire |
| Connection method | M12 connector (4-pole) |
| Standard sensing object | 12 × 12 × 1 mm |
| Barrel Length | Long body |
| Differential travel | Differential travel 10% max. of sensing distance |
| Voltage influence | ±1% max. of sensing distance in rated voltage range ±15% |
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current carry parts and case |
| Overall Length | 70 mm |
| Thread Length | 56 mm |
| Ambient humidity | Operating: 35% to 95%, Storage: 35% to 95% |
|
Response Frequency
|
1kHz
|
|
Ambient air temperature
|
Operating: −40°C to 70°C, Storage: −40°C to 85°C (with no icing or condensation)
|
| Current consumption | 10 mA max |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Indicator | Operation indicator (Yellow LED) |
| Degree of protection | IP67/IP69K |
| Material housing | Nickel-Plated Brass |
Find the Omron Proximity Sensor NPN E2A-M12LS04-M1-C1. It features an M12 sensor head, flush/shielded mounting, 4 mm sensing distance, and normally open (NO) switching mode. Operating on DC 3-wire power, it employs an M12 connector for exact connection. With a long body barrel, an overall length of 70mm, and a thread length of 56mm, this sensor guarantees effective proximity detection. IndMALL Automation assures competitive rates for the Omron Inductive Sensor.
