E2E-C04N03-WC-C1 2M: Inductive Proximity Switch in Chennai
The technical specifications for the Omron E2E-C04N03-WC-C1 2M Inductive Proximity Switch:
- Sensor Head Diameter: 4 Dia (4mm)
- Installation: Non-flush (Unshielded)
- Sensing Distance: 3 mm
- Connection Method: Pre-Wired Models (2 meters)
- Cable Specifications: PVC (Oil-Resistant)
- Switching: Normally Open (NO)
- Output Configuration: NPN, DC 3-wire
- Response Frequency: 2 kHz
- Power Supply Voltage: 10 to 30 VDC
Omron E2E-C04N03-WC-C1 2M Inductive Proximity Switch Technical Specification:
| Sensor Head (Dia) | 4 Dia (4mm) |
| Installation | Non-Flush | Unshielded |
| Sensing Distance | 3 mm |
| Connection Method | Pre-wired Models (2 m) |
| Cable Specifications | PVC (Oil-resistant) |
| Switching | NO |
| Output Configuration | DC 3-wire NPN open collector |
| Differential travel | 15% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 9 × 9 × 1 mm |
| Response frequency | 2 kHz |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)) |
| Current consumption | 10 mA max. |
| Indicator | Operation indicator: Yellow (complies with European standard EN60947-5-2) Lights during output |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, and Load short-circuit protection. |
| Ambient air temperature | Operation and storage: −25 to 70°C (with no icing or condensation) |
| Ambient humidity | Operation and storage: 35% to 95% (with no condensation) |
| Temperature influence | ±15% max. of sensing distance at 23°C within a temperature range of −25 to 70°C |
| Voltage influence | ±2.5% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Sensing Surface | Heat-resistant ABS |
Looking for Omron E2E-C04N03-WC-C1 2M Inductive Proximity Sensors? You’re in the right place! Get the Omron Inductive Proximity Sensor E2E C04N03 WC C1 2M with a 4-diameter, shielded design, 3mm sensing distance, Pre-wired models (2 m), and NPN/NO configuration, DC Three-wires models, Cylinder type and power supply 10 to 30 VDC at the best rates from IndMALL Automation in Chennai.
