E2E-S04N02-WC-C1 2M: Miniature Inductive Proximity Sensor in Chennai
The technical specifications for Omron E2E-S04N02-WC-C1 2M Miniature Inductive Proximity Sensor are:
- Sensor Head (Dia): M4
- Installation: Non-Flush | Unshielded
- Sensing Distance: 2mm
- Connection Method: Pre-wired Models (2 m)
- Cable Specifications: PVC (Oil-resistant)
- Switching: NO
- Output: NPN
- Power source: DC Three-wires models
- Response Frequency: 3.5 kHz
- Power Supply Voltage: 10 to 30 VDC
Omron E2E-S04N02-WC-C1 2M Miniature Inductive Proximity Sensor Technical Specification:
| Sensor Head (Dia) | M4 |
| Installation | Non-Flush | Unshielded |
| Sensing Distance | 2 mm |
| Connection Method | Pre-wired Models (2 m) |
| Power source | DC Three-wires models |
| Cable Specifications | PVC (Oil-resistant) |
| Switching | NO |
| Output | NPN |
| Differential travel | 15% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 6 × 6 × 1 mm |
| Response frequency | 3.5 kHz |
| Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)) |
| Current consumption | 10 mA max. |
| Indicator | Operation indicator: Yellow (complies with European standard EN60947-5-2) Lights during output |
| Protection circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, and Load short-circuit protection. |
| Ambient air temperature | Operation and storage: −25 to 70°C (with no icing or condensation) |
| Ambient humidity | Operation and storage: 35% to 95% (with no condensation) |
| Temperature influence | ±15% max. of sensing distance at 23°C within a temperature range of −25 to 70°C |
| Voltage influence | ±2.5% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Sensing Surface | Heat-resistant ABS |
Are you in search of an Omron E2E-S04N02-WC-C1 2M Miniature Inductive Proximity Sensor in Chennai? Look no further. The technical specifications for this Inductive Proximity Sensor include an M4 sensor head diameter, non-flush and unshielded installation, 2mm sensing distance, pre-wired Models (2 m) connection with PVC (Oil-resistant) cable, NO switching, NPN output, DC Three-wires power source, 3.5 kHz response frequency, and operates on 10 to 30 VDC. The differential travel is 15% max. of the sensing distance, and it can detect ferrous metal. Check IndMALL Automation for the best prices.
