E2E-X10ME1-M1: Inductive Proximity Sensor Switch in Chennai
The technical specifications for the Omron E2E-X10ME1-M1 Inductive Proximity Sensor Switch are:
- Sensor Head (Dia): M18
- Installation: Non-Flush | Un-shielded
- Sensing Distance: 10 mm
- Connection Method: M12 Connector Models
- Switching: NO
- Output Configuration: NPN, DC 3 Wire
- Response Frequency: 0.2 KHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X10ME1-M1 Inductive Proximity Sensor Switch Technical Specification:
| Sensor Head (Dia) | M18 |
| Installation | Non-Flush | Un-shielded |
| Sensing Distance | 10 mm |
| Connection Method | M12 Connector Models |
| Switching | NO |
| Output Configuration | NPN, DC 3 Wire |
| Differential travel | 10% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 30 × 30 × 1 mm |
| Response frequency | 0.2 KHz |
| Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
| Leakage current | 13 mA max |
| Indicator | Operation indicator (red) |
| Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
| Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
Looking for an Omron E2E-X10ME1-M1 inductive proximity sensor switch in Chennai? You’ve seen the right place. This sensor is M18 size, Non-Flush/Unshielded, senses up to 10 mm, and has an M12 connector, DC 3 Wire NPN, PVC cable, switching NO. For low prices on Omron E2E-X10ME1 M1 Sensors. Get the best deal at IndMALL Automation.
