E2E-X10Y1 2M: Omron M30 Proximity Sensor in Chennai
The technical specifications for the Omron M30 Proximity Sensor E2E-X10Y1 2M are:
- Sensor Head (Dia): M30
- Installation: Flush | Shielded
- Sensing Distance: 10 mm
- Connection Method: Pre-wired Models
- Cable Specifications: PVC (oil-resistant)
- Switching: NO
- Output Configuration: AC 2 Wire
- Response Frequency: 25 Hz
- Power Supply Voltage: 24 to 240 VAC
Omron M30 Proximity Sensor E2E-X10Y1 2M Technical Specification:
| Sensor Head (Dia) | M30 |
| Installation | Flush | Shielded |
| Sensing Distance | 10 mm |
| Connection Method | Pre-wired Models |
| Cable Specifications | PVC (oil-resistant) |
| Switching | NO |
| Output Configuration | AC 2 Wire |
| Differential travel | 10% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 30 × 30 × 1 mm |
| Response frequency | 25 Hz |
| Power supply voltage | 24 to 240 VAC (20 to 264 VAC), 50/60 Hz |
| Leakage current | 1.7 mA max |
| Indicator | Operation indicator (red) |
| Protection circuit | Surge suppressor |
| Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
Were you looking for Omron E2E-X10Y1 2M Inductive Proximity Sensor in Chennai? You’re in the right place. The Omron M30 Proximity Sensor E2E-X10Y1 2M features a flush and shielded installation with a 10mm sensing distance. It uses pre-wired models with PVC (oil-resistant) cable, NO switching, AC 2 Wire output configuration, 25 Hz response frequency, and operates on a 24 to 240 VAC power supply voltage. For the best prices, check IndMALL Automation.
