Omron E2E-X1R5E1-M3: Shielded Inductive Sensor in Chennai
The technical specifications for the Omron E2E-X1R5E1-M3 Shielded Inductive Sensor:
- Sensor Head (Dia): M8
- Installation: Flush | Shielded
- Sensing Distance: 1.5 mm
- Connection Method: M8 Connector Models
- Switching: NO
- Output Configuration: NPN, DC 3 Wire
- Response frequency: 2 KHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X1R5E1-M3 Shielded Inductive Sensor Technical Specification:
| Sensor Head (Dia) | M8 |
| Installation | Flush | Shielded |
| Sensing Distance | 1.5 mm |
| Connection Method | M8 Connector Models |
| Switching | NO |
| Output Configuration | NPN, DC 3 Wire |
| Differential travel | 10% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 8 × 8 × 1 mm |
| Response frequency | 2 KHz |
| Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
| Leakage current | 13 mA max |
| Indicator | Operation indicator (red) |
| Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
| Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
Looking for the Omron E2E-X1R5E1-M3 Shielded Inductive Sensor in Chennai? You’re in the right place. It has an M8 head, flush and shielded installation, 1.5 mm sensing distance, M8 connector models, Normally Open (NO) switching, NPN DC 3 wire output, 2 kHz response frequency, and operates on 12-24 VDC power. It’s best for detecting ferrous metals, especially iron-sized 8 × 8 × 1 mm. Get the best prices for this sensor at IndMALL Automation.
