H7CC-R: Omron Tachometer Counter
Technical Specifications of Omron Tachometer Counter H7CC-R:
| Spec | Value |
|---|---|
| Classification | Tachometer |
| Configuration | Tachometer |
| Power Supply Voltage | 100 to 240 VAC, 50/60 Hz •12 to 24 VDC or 48 VAC, 50/60 Hz |
| Power Consumption | Approx. 6.8 VA at 100 to 240 VAC, Approx. 5.5 VA/ 3.3 W at 24 VAC/12 to 48 VDC |
Omron Tachometer Counter H7CC-R Technical Specifications:
| Specification | Value |
|---|---|
| Classification | Tachometer |
| Configuration | Tachometer |
| Power Supply Voltage | 100 to 240 VAC, 50/60 Hz •12 to 24 VDC or 48 VAC, 50/60 Hz |
| Mounting Method | Flush mounting or surface mounting |
| External Connections | 11-pin socket |
| input Signals | Count and hold |
| Counter Output Mode | HI-LO, AREA, HI-HI, LO-LO |
| Outputs | Contact output (SPDT) |
| Digits | 6 digits (0 to 999999) |
| Operating voltage fluctuation range | 85% to 110% of rated supply voltage (90% to 110% at 12 to 48 VDC) |
| Degree of protection | IEC IP66 for panel surface only and only when Y92S-P6 Waterproof Packing is used |
| Maximum counting speed | 30 Hz (minimum pulse width: 16.7 ms) 10 kHz (minimum pulse width: 0.05 ms) |
| Counter Input mode | No-voltage Input Impedance when ON: 1 kΩ max. (Leakage current: 12 mA when 0 Ω) ON residual voltage: 3 V max. Impedance when OFF: 100 kΩ min. Voltage Input High (logic) level: 4.5 to 30 VDC Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ) |
| Auto-zero time/Startup time | - |
| Counter One-shot out put time | 0.001 to 99.999 (in Tachometer Mode)/ 0.0 to 99.9 s |
| Sensor waiting time | - |
| Counter Reset system | - |
| Tachometer | Rightmost 3 digits |
| Prescaling function | 0.001 to 99.999 (in Tachometer Mode) |
| Sensor waiting time | 290 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) |
| Input method | No-voltage (NPN) input/voltage (PNP) input (switchable) No-voltage inputs: ON impedance: 1 kΩ max. (Leakage current: 12 mA at 0 Ω) ON residual voltage: 3 V max. OFF impedance: 100 kΩ min. Voltage input: High (logic) level: 4.5 to 30 VDC Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ) |
| External power supply | 12 VDC (±10%), 100 mA * Refer to Safety Precautions (Common) on page 61 for details. |
| Control output | Contact output: 3 A at 250 VAC/30 VDC, resistive load (cosφ=1) Minimum applied load:10 mA at 5 VDC (failure level: P, reference value) |
| Display | 7-segment, negative transmissive LCD Character height Present value: 10 mm (white), comparison value: 6 mm (green) |
| Memory backup | Non-volatile memory (overwrites: 100,000 times min.) that can store data for 10 years min |
| Operating temperature range | −10 to 55°C (−10 to 50°C if Counter/Tachometers are mounted side by side) (with no icing or condensation) |
| Storage temperature range | -25 to 70°C (with no icing or condensation) |
| Operating humidity range | 25% to 85% |
| Case Color | Black (N1.5) |
IndMALL Automation Offers Omron Tachometer Counter, H7CC-R with exclusive offers. Component Specifications of H7CC-R features HI-LO, AREA, HI-HI, LO-LO, 100 to 240 VAC, 50/60 Hz
•12 to 24 VDC or 48 VAC, 50/60 Hz, 11-pin socket, Count and hold. It rounds off its features with Tachometer, Approx. 6.8 VA at 100 to 240 VAC,
Approx. 5.5 VA/ 3.3 W at 24 VAC/12 to 48 VDC, Flush mounting or surface mounting. Don't Miss Out on a Quote for your requirement of Omron Tachometer Counter. Our competitive edge: better pricing and support than other Suppliers.
