Pepperl + Fuchs Inductive Proximity Sensors
IA6-12GM50-IU-V1
Pepperl Fuchs IA6-12GM50-IU-V1 Technical Specifications :
| Output type | Analog current output or analog voltage output | |
| Installation | quasi flush | |
| Output polarity | DC | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 18 mm x 18 mm x 1 mm |
|
| Reduction factor rAl | 0.33 | |
| Reduction factor rCu | 0.28 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.43 | |
| Measurement Range | 0 … 6 mm | |
| Output type | 4-wire | |
| Installation conditions – A | 2 mm | |
| Installation conditions – B | 12 mm | |
| Installation conditions – C | 18 mm | |
| Installation conditions – F | 14 mm | |
| Operating voltage | 15 … 30 V , residual ripple 20 % UB | |
| Limit frequency (3dB) | 1000 Hz | |
| Reverse polarity protection | ||
| Short-circuit protection | ≤ 10 mA | |
| Repeat accuracy | ± 0.32 mm | |
| Resolution | 0 … 1 µm | |
| No-load supply current | ≤ 10 mA | |
| MTTFd | 551 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Output type | 0 … 10 V / 4 … 20 mA | |
| Load resistor | Current output A2: 0.4 kΩ (UB=15V) / 1 kΩ (UB=30V) | |
| Load current | Voltage output A1: ≤ 15 mA | |
| Recovery time | 20 ms | |
| Adjustment tolerance zero point | ≤ ± 10 % of full-scale value | |
| Temperature drift | ± 5 % (0 … 70 °C) ± 10 % (-25 … 0 °C) |
|
| Residual ripple | 20 % | |
| Standard conformity-Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
|
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | chromium plated brass | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mass | 27 g | |
Buy Pepperl Fuchs IA6-12GM50-IU-V1 Inductive Analog Sensor at wholesale rates. If you are looking for or if you are searching for Inductive Sensor dealers, finally you reached the correct place. From IndMALL Automation you can get the P&F IA6 12GM50 IU V1 Inductive Sensor. We are supplying P & F Sensor IA6-12GM50-IU-V1 in Chennai, Bangalore, Hyderabad, Delhi, Mumbai, Pune, Vijayawada, Kolkata, Coimbatore, Kerala, Jaipur, Vapi, and Ahmedabad.
You can purchase Pepperl Fuchs IA6-12GM50-IU-V1 Analog Sensor from IndMALL Automation, We can assure you that P&F Inductive Sensors IA6 12GM50 IU V1 in terms of both durability and performance it’s the best choice. If you are bothered about the Pepperl+Fuchs IA6-12GM50-IU-V1 Inductive Sensor prices, you can be totally sure to get the best rates as Challaturu Engg & Automation Pvt Ltd. We bring you original & Quality Pepperl+Fuchs IA6 12GM50 IU V1 Inductive Sensors. Procure P&F IA6-12GM50-IU-V1 Inductive Sensor Now and available the best offers on your purchase.