KCD2-SLD-Ex2-1545-Y1-SP: P&F SIL 3, Spring Terminals Solenoid Driver
Technical Specifications of P&F SIL 3, Spring Terminals Solenoid Driver KCD2-SLD-Ex2-1545-Y1-SP:
| Spec | Value |
|---|---|
| Signal type | Digital Output |
| Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) |
| Connection | spring terminals |
| Output current | 45 mA |
P&F SIL 3, Spring Terminals Solenoid Driver KCD2-SLD-Ex2-1545-Y1-SP Technical Specifications:
| Specification | Value |
|---|---|
| Signal type | Digital Output |
| Safety Integrity Level (SIL) | - |
| Systematic capability (SC) | - |
| Supply Connection | Power Rail or terminals 9+, 10- bus powered |
| Rated voltage | 18 ... 30 V DC |
| Rated current | - |
| Power dissipation | < 2 W |
| Power consumption | max. 3.5 W at 45 mA output current |
| Connection side (Input) | control side |
| Connection (Input) | terminals 5+, 6-; 7+, 8- limited electrical values : max. 30 V , max. 5 A |
| Signal Level | loop powered 1-signal: 18 ... 30 V DC (current limited to ≥ 20 mA) 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 24 V DC (current limited at 5 mA) 0-signal: 0 ... 5 V DC |
| Inrush current(Input) | ≤ 200 mA after 100 µs |
| Connection side (Output) | field side |
| Connection (Output) | terminals 1+, 2-; 3+, 4- |
| Internal resistor | approx. 167 Ω |
| Current | typ. 45 mA |
| Voltage | ≥ 15 V |
| Output current | 45 mA |
| Switching frequency | - |
| Display elements | LEDs |
| Control elements | DIP switch |
| Labeling | space for labeling at the front |
| Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) |
| Connection | spring terminals |
| Mounting | on 35 mm DIN mounting rail |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP20 |
| Mass | approx. 105 g |
Call us for P&F SIL 3, Spring Terminals Solenoid Driver KCD2-SLD-Ex2-1545-Y1-SP at the lowest pricing. In-depth Technical Analysis of KCD2-SLD-Ex2-1545-Y1-SP, features digital output and operates with a power rail or bus-powered input voltage of 18-30 V DC, consuming less than 2 W, with a maximum of 3.5 W at 45 mA output current. The control side connects via terminals 5+, 6-; 7+, 8-, with limited electrical values of max. 30 V and max. 5 A, supporting both loop and bus-powered configurations. Loop-powered 1-signal voltage ranges from 18-30 V DC (current limited to ≥ 20 mA) and 0-signal voltage from 0-5 V DC, while bus-powered 1-signal voltage ranges from 15-24 V DC (current limited at 5 mA) and 0-signal voltage from 0-5 V DC.
The device supports currents up to 200 mA after 100 µs. The field side connects via terminals 1+, 2-; 3+, 4-, with a resistance of approximately 167 Ω and a typical current of 45 mA at ≥ 15 V. The unit includes LED indicators and a DIP switch, providing space for labeling at the front. Dimensions are 12.5 x 124 x 114 mm, and it mounts on a 35 mm DIN rail using spring terminals. It operates in temperatures ranging from -40 to 70 °C, with an IP20 rating, and weighs approximately 105 g. Capture the Best Deal with a Quote for your requirement of P&F SIL 3, Spring Terminals Solenoid Driver. Our promise: More affordable pricing and more personalized support than other Dealers.
