KFD0-CS-Ex1-50P: P&F 5 to 35 V DC Voltage Current Drivers
Technical Specifications of P&F 5 to 35 V DC Voltage Current Drivers KFD0-CS-Ex1-50P:
| Spec | Value |
|---|---|
| Signal Type | Analog input/analog output |
| Rated Voltage | 5 ... 35 V DC , loop powered |
| Connection | screw terminals |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
P&F 5 to 35 V DC Voltage Current Drivers KFD0-CS-Ex1-50P Technical Specifications:
| Specification | Value |
|---|---|
| Signal type | Analog input/analog output |
| Safety Integrity Level (SIL) | SIL 2 |
| Rated voltage | 5 ... 35 V DC , loop powered |
| Control circuit Connection | terminals 12-, 11+ |
| Control circuit Voltage | 5 ... 35 V DC |
| Control circuit Current | 4 ... 20 mA |
| Field circuit Connection | terminals 1+, 2- |
| Field circuit Voltage | for 5V < Uin < 24.3V: ≥ 0.9 x Uin - (0.37 x current in mA) - 1.0 for Uin > 24.3 V: ≥ 21 V - (0.36 x current in mA) |
| Field circuit Current | ≤ 40 mA(Transfer current) |
| Influence of ambient temperature | ≤ ± 2 µA/K at Uin ≤ 20 V; ≤ ± 5 µA/K at Uin > 20 V |
| Damping | - |
| Rise time | ≤ 5 ms at bounce from 4 ... 20 mA and Uin < 24 V |
| Galvanic isolation Input/Output | - |
| Conformity Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| Conformity Degree of protection | IEC 60529:2001 |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| EU-type examination certificate | BAS 98 ATEX 7343 X |
| Certificate | FIDI 22 ATEX 0001 X |
Reach Us by Email for P&F 5 to 35 V DC Voltage Current Drivers KFD0-CS-Ex1-50P at Discounted Rates. Key Technical Features of KFD0-CS-Ex1-50P are 4 ... 20 mA and operates on a terminals 1+, 2- and for 5V < Uin 24.3 V: ≥ 21 V - (0.36 x current in mA) ratings. The device has a 990 ms response time and utilizes -. It complies with -20 ... 70 °C (-4 ... 158 °F) standards, operates in temperatures from -20 ... 70 °C (-4 ... 158 °F) and has an screw terminals rating. The unit mounts on a 99 mm DIN rail and weighs approximately 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1, with dimensions of BAS 98 ATEX 7343 X. Navigate Your Needs with a Quote for your requirement of P&F 5 to 35 V DC Voltage Current Drivers. Our pricing and support are unrivaled, especially when compared to other Competitors.
