KFD0-SD2-Ex1-1180: P&F ≤ 150 Ω Internal Resistor Solenoid Driver
Technical Specifications of P&F ≤ 150 Ω Internal Resistor Solenoid Driver KFD0-SD2-Ex1-1180:
| Spec | Value |
|---|---|
| Signal type | Digital Output |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) |
| Connection | screw terminals |
| Output current | 80 mA |
P&F ≤ 150 Ω Internal Resistor Solenoid Driver KFD0-SD2-Ex1-1180 Technical Specifications:
| Specification | Value |
|---|---|
| Signal type | Digital Output |
| Safety Integrity Level (SIL) | SIL 3 |
| Systematic capability (SC) | - |
| Supply Connection | - |
| Rated voltage | 21 ... 35 V DC , loop powered |
| Rated current | - |
| Power dissipation | < 1 W (≤ 30 V) |
| Power consumption | - |
| Connection side (Input) | control side |
| Connection (Input) | terminals 7, 9 |
| Signal Level | - |
| Inrush current(Input) | 140 mA at 20 V input voltage, load = 140 Ω 100 mA at 35 V input voltage, load = 140 Ω |
| Connection side (Output) | field side |
| Connection (Output) | terminals 1+, 2- |
| Internal resistor | ≤ 150 Ω |
| Current | ≥ 80 mA |
| Voltage | ≥ 11 V |
| Output current | 80 mA |
| Switching frequency | - |
| Display elements | LED |
| Control elements | - |
| Labeling | space for labeling at the front |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) |
| Connection | screw terminals |
| Mounting | on 35 mm DIN mounting rail |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Mass | approx. 100 g |
Give Us a Call for P&F ≤ 150 Ω Internal Resistor Solenoid Driver KFD0-SD2-Ex1-1180. This solenoid driver features digital output with a SIL 3 rating and operates with a loop-powered input voltage of 21-35 V DC, consuming less than 1 W (≤ 30 V). The control side connects via terminals 7 and 9, delivering 140 mA at 20 V input voltage and 100 mA at 35 V input voltage, both with a load of 140 Ω. The field side connects via terminals 1+ and 2-, with a resistance of ≤ 150 Ω and a typical current of ≥ 80 mA at 11 V. The unit includes an LED indicator and provides space for labeling at the front. Dimensions are 20 x 107 x 115 mm, and it mounts on a 35 mm DIN rail. It operates in temperatures ranging from -20 to 60 °C, with an IP20 rating, and weighs approximately 100 g. Elevate Your Project with a Quote for your requirement of P&F ≤ 150 Ω Internal Resistor Solenoid Driver. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
