Home / Products / Proximity Sensor / Pepperl Fuchs / NBB2-8GM-30-E2
Pepperl Fuchs Inductive Proximity Switch NBB2-8GM30-E2
The technical specifications for the NBB2-8GM-30-E2 are as follows:
- Rated operating distance: 2mm
- Switching function: Normally open (NO)
- Output type: PNP
- Installation: Flush
- Output polarity: DC
- Assured operating distance: 0 to 1.62mm
- Output type: 3-wire
- Connection type: Cable PVC, 2m
- Housing material: Brass, nickel-plated
- Sensing face: LCP
- Operating voltage: 5 to 30V
NBB2-8GM-30-E2 Technical Specifications:
| Switching function | Normally open (NO) |
| Output type | PNP |
| Rated operating distance | 2 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 … 1.62 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.3 |
| Reduction factor r304 | 0.75 |
| Reduction factor rBrass | 0.45 |
| Output type | 3-wire |
| Operating voltage | 5 … 30 V |
| Switching frequency | 0 … 6000 Hz |
| Hysteresis | typ. 5% |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 1.5 V |
| Operating current | 0 … 100 mA |
| No-load supply current | ≤ 10 mA |
| Off-state current | 0 … 0.2 mA |
| Time delay before availability | ≤ 100 ms |
| Switching state indicator | LED, yellow |
| Tightening torque, fastening screws | 0.4 Nm |
| MTTFd | 960 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity-Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Connection type | cable PVC , 2 m |
| Core cross-section | 0.14 mm2 |
| Housing material | brass, nickel-plated |
| Sensing face | LCP |
| Degree of protection | IP67 |
| Cable diameter | 3.5 mm ± 0.1 mm |
| Cable Bending radius | > 10 x cable diameter |
Product Documentation: NBB2-8GM30-E2
Related Products: NBB2-8GM50-E2
NBN8-12GM50-E2
Inductive Proximity Sensor, Sensor diameter: M12, Switching function: Normally open (NO), Output type: PNP, Installation: Non-flush, Switching frequency: 0 … 1650 Hz, Output type: 3-wire, Sensor length: 50mm, Type of voltage: DC, Connection type: 2 m PVC cable, Operating voltage: DC 5-36V, Housing material: Brass with white bronze coating, Degree of protection: IP68.
NBN8-18GM50-E2-V1
Inductive Proximity Sensor, Sensor diameter: M18, Rated operating distance: 8 mm, Switching function: Normally open (NO), Output type: PNP, Installation: Non-flush, Switching frequency: 0 … 1650 Hz, Output type: 3-wire, Type of voltage: DC, Connection type: Connector plug, Operating voltage: 5 … 36 V, Housing material: Brass with white bronze coating, Degree of protection: IP68.
NBN8-18GM50-E2
Inductive Proximity Sensor, Sensor diameter: M18, Rated operating distance: 8 mm, Switching function: Normally open (NO), Output type: PNP, Installation: Non-flush, Switching frequency: 0 … 1650 Hz, Output type: 3-wire, Type of voltage: DC, Connection type: Cable, Operating voltage: 5 … 36 V, Housing material: Brass with white bronze coating, Degree of protection: IP68.
NBB5-18GM40-Z0
Inductive Proximity Sensor, Sensor diameter: M18, Rated operating distance: 5 mm, Switching function: Normally open (NO), Output type: Two-wire, Installation: Flush, Switching frequency: 0 … 500 Hz, Output type: 2-wire, Type of voltage: DC, Connection type: 2 m PVC cable, Operating voltage: 5 … 60 V, Housing material: Brass with nickel-plating, Degree of protection: IP67.
NBB5-18GM50-E2
Inductive Proximity Sensor, Sensor diameter: M18, Rated operating distance: 5 mm, Switching function: Normally open (NO), Output type: PNP, Installation: Flush, Switching frequency: 0 … 1950 Hz, Output type: 3-wire, Type of voltage: DC, Connection type: Cable, Operating voltage: 5 … 36 V, Housing material: Brass with white bronze coating, Degree of protection: IP68.
IndMALL Automation is dedicated to delivering exceptional customer service, swift shipping, and cost-effective rates on our merchandise. As certified distributors of the Pepperl+Fuchs NBB4-12GM50-E2 inductive proximity sensor, we present a premium, long-lasting product that is perfect for your automation demands. P&F NBB4 12GM50 E2 inductive sensors are designed for automation applications and are capable of detecting metallic objects within a range of 4mm and Cylindrical type. It has a normally open (NO) switching function and uses a PNP output-type inductive sensor with a 3-wire connection.
The sensor operates on a DC output polarity with an operating voltage of 10 to 30V, and it has a switching of 0 to 800 Hz. The hysteresis of the sensor is typically 5%, which means there is a small difference in the distance at which the sensor switches on and off. The Pepperl+Fuchs NBB4-12GM50-E2 proximity sensor is designed to be installed flush and has an assured operating distance of 0 to 3.24mm at temperatures between -25 to 70°C and 0 to 3.04mm at temperatures between -40 to -25°C. The sensor is protected against reverse polarity and has pulsing short-circuit protection.
The sensor’s housing material is made of brass and nickel-plated, and the sensing head is made of PBT. The sensor has an IP67 degree of protection, meaning that it is protected against dust and water ingress. Overall, the Pepperl+Fuchs NBB4-12GM50-E2-V1 inductive proximity sensor or inductive sensor is a high-quality and reliable sensor that is ideal for automation applications that require a small sensing distance and high accuracy. IndMALL provides you with similar products at an affordable price.