PLC-OPT- 60DC/300DC/1: 2900384 - Phoenix 300 V DC Solid-state Relay
Technical Specifications of Phoenix 300 V DC Solid-state Relay PLC-OPT- 60DC/300DC/1 2900384:
Spec | Value |
---|---|
Product Type | Solid-state relay module |
Input Voltage Range | 48 V DC ... 60 V DC |
Output Circuit | - |
Connection Method | Push-in connection |
Phoenix 300 V DC Solid-state Relay PLC-OPT- 60DC/300DC/1, 2900384 Technical Specifications:
Specification | Value |
---|---|
Product type | Solid-state relay module |
Product family | PLC-INTERFACE |
Application | With integrated solid-state relay |
Overvoltage category | III |
Maximum power dissipation for nominal condition | 0.3 W |
Test voltage (Input/output) | - |
Nominal input voltage UN | 60 V DC |
Nominal voltage (plugged-in solid-state relay) | - |
Input voltage range in reference to UN | 0.8 ... 1.2 |
Input voltage range | 48 V DC ... 60 V DC |
Switching threshold "0" signal in reference to UN | ≤ 0.4 |
Switching threshold "1" signal in reference to UN | ≥ 0.8 |
Typical input current at UN | 5 mA |
Typical response time | 0.3 ms |
Typical turn-off time | 0.7 ms |
Operating voltage display | Yellow LED |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Transmission frequency | 50 Hz |
Contact switching type | 1 N/O contact |
Design of digital output | electronic |
Contact connection type | - |
Output voltage range | 12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Limiting continuous current | 1 A (see derating curve) |
Maximum inrush current | - |
Voltage drop at max. limiting continuous current | < 500 mV |
Output circuit | - |
Connection method | Push-in connection |
Stripping length | 10 mm |
Screw thread | - |
Tightening torque | - |
Width | 6.2 mm |
Height | 80 mm |
Depth | 95 mm |
Color | gray (RAL 7042) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Temperature | D |
Humidity | A |
Vibration | B/C |
EMC | B |
Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Mounting Type | DIN rail mounting |
Mounting Position | any |
Degree of Protection Relay | - |
Housing Material | - |
Output Resistor | - |
Send Your Inquiry for Phoenix 300 V DC Solid-state Relay PLC-OPT- 60DC/300DC/1 part no: 2900384 with cost-effective solutions. Essential Technical Specs of PLC-OPT- 60DC/300DC/1, 2900384 are Solid-state relay module type from the PLC-INTERFACE product family, designed for With integrated solid-state relay applications in industrial settings. This module operates at a nominal input voltage of 60 V DC, with an input voltage range from 48 V DC ... 60 V DC, making it versatile for various uses. The typical input current at UN is 5 mA ensuring efficient energy consumption. With a rapid response time of 0.3 ms, it provides quick and reliable switching, utilizing an 1 N/O contact for seamless operation. The digital output is electronic, designed to handle a limiting continuous current of 1 A (see derating curve), and features a low voltage drop of < 500 mV at maximum limiting current. The output circuit is a - design, ensuring secure and stable connections, with a Push-in connection. Capture the Best Deal with a Quote for your requirement of Phoenix 300 V DC Solid-state Relay. Our pricing and support are designed to exceed the standards of other Traders & Suppliers.