REL-MR- 60DC/21AU/MS: 2909647 - Phoenix 0.18 W Maximum Power Single Relay
Technical Specifications of Phoenix 0.18 W Maximum Power Single Relay REL-MR- 60DC/21AU/MS 2909647:
Spec | Value |
---|---|
Product Type | Single relay |
Mechanical service life | 1x 107 cycles |
Nominal input voltage UN | 60 V DC |
Input voltage range | 36 V DC ... 165 V DC |
Phoenix 0.18 W Maximum Power Single Relay REL-MR- 60DC/21AU/MS, 2909647 Technical Specifications:
Specification | Value |
---|---|
Product type | Single relay |
Mechanical service life | 1x 107 cycles |
Insulation | - |
Overvoltage category | III |
Pollution degree | 3 |
Service life electrical | - |
Maximum power dissipation for nominal condition | 0.18 W |
Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | - |
Rated insulation voltage | - |
Rated surge voltage | - |
Nominal input voltage UN | 60 V DC |
Input voltage range | 36 V DC ... 165 V DC |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 3 mA |
Typical response time | 2.5 ms |
Coil voltage | - |
Status display | - |
Contact switching type | 1 changeover contact |
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC |
Minimum switching voltage | 5 V (at 100 mA) |
Limiting continuous current | 6 A |
Maximum inrush current | 50 mA |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
Connection method | Plug / solder connection |
Width | 5 mm |
Height | 28 mm |
Depth | 16 mm |
Degree of protection | RT II |
Degree of protection (Installation location) | - |
Ambient temperature (operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Standards/regulations | IEC 60664 |
Mounting type | - |
Mounting position | any |
Mains frequency | - |
Typical release time range | - |
Coil resistance | 20500 Ω ±15 % (at 20 °C) |
Switching capacity | 2 A (at 24 V, DC13) |
Motor load according to UL 508 | - |
Input power dissipation for UN | - |
3-phase motor load | - |
Product family | - |
Relay type | - |
Test voltage () | - |
Degree of protection (Relay) | - |
Inrush current, minimum | - |
Non-operate voltage | - |
Safe operate voltage | - |
Test voltage (N/O contact / N/O contact) | - |
Call us for Phoenix 0.18 W Maximum Power Single Relay REL-MR- 60DC/21AU/MS part no: 2909647 at the best rates. Technical Attributes of REL-MR- 60DC/21AU/MS, 2909647 are mechanical service life of 1x 107 cycles, designed for demanding industrial applications. The sensor operates at a nominal input voltage of 60 V DC, with an input voltage range of 36 V DC ... 165 V DC. The typical input current at UN is 3 mA with a response time of 5 ms. The sensor supports a maximum switching voltage of 250 V AC, and a minimum switching voltage of 5 V (at 100 mA). It has a limiting continuous current of 6 A, with a maximum inrush current of 50 mA, and a minimum switching current of 10 mA (at 12 V). The interrupting rating for ohmic loads is 140 W (at 24 V DC). The connection method is via a Plug / solder connection, with a degree of protection rated at RT II. The sensor operates reliably in ambient temperatures ranging from -40 °C ... 85 °C. Unlock Exclusive Pricing with a Quote for your requirement of Phoenix 0.18 W Maximum Power Single Relay. Trust in our ability to provide more advantageous pricing and dedicated support beyond other other Dealers.