Phoenix REL-MR-BL- 48DC/21-21 (1109544) | Chat with Us Now
+91 79955 44066 sales@indmall.in

REL-MR-BL- 48DC/21-21: 1109544 - Phoenix Input Voltage 48 V DC Single Relay

Phoenix Contact REL-MR-BL- 48DC/21-21 1109544

Technical Specifications of Phoenix Input Voltage 48 V DC Single Relay REL-MR-BL- 48DC/21-21 1109544:

SpecValue
Product TypeSingle relay
Mechanical service life3x 107 cycles
Nominal input voltage UN48 V DC
Input voltage range33.6 V DC ... 108 V DC

Phoenix Input Voltage 48 V DC Single Relay REL-MR-BL- 48DC/21-21, 1109544 Technical Specifications:

SpecificationValue
Product typeSingle relay
Mechanical service life3x 107 cycles
InsulationBasic insulation
Overvoltage categoryIII
Pollution degree3
Service life electricalsee diagram
Maximum power dissipation for nominal condition0.4 W
Test voltage (Winding/contact)5 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)-
Rated insulation voltage250 V AC
Rated surge voltage4 kV
Nominal input voltage UN48 V DC
Input voltage range33.6 V DC ... 108 V DC
Drive and functionmonostable
Drive (polarity)non-polarized
Typical input current at UN8.7 mA
Typical response time6 ms
Coil voltage48 V DC
Status display-
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 10 mA)
Limiting continuous current8 A
Maximum inrush current12 A (20 ms)
Min. switching current10 mA (At 5 V)
Interrupting rating (ohmic load) max.190 W (at 24 V DC)
Connection methodPlug / solder connection
Width12.7 mm
Height29 mm
Depth15.7 mm
Degree of protectionRT II
Degree of protection (Installation location)-
Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Standards/regulationsIEC 60664
Mounting typePlug-in mounting
Mounting positionany
Mains frequency-
Typical release time range-
Coil resistance5.5 kΩ ±10 %
Switching capacity2 A (at 24 V, DC13)
Motor load according to UL 508-
Input power dissipation for UN-
3-phase motor load-
Product family-
Relay type-
Test voltage ()-
Degree of protection (Relay)-
Inrush current, minimum-
Non-operate voltage-
Safe operate voltage-
Test voltage (N/O contact / N/O contact)-
Send Your Inquiry for Phoenix Input Voltage 48 V DC Single Relay REL-MR-BL- 48DC/21-21 part no: 1109544 with cost-effective solutions. Essential Technical Specs of REL-MR-BL- 48DC/21-21, 1109544 are mechanical service life of 3x 107 cycles, designed for demanding industrial applications. The sensor operates at a nominal input voltage of 48 V DC, with an input voltage range of 33.6 V DC ... 108 V DC. The typical input current at UN is 8.7 mA with a response time of 8 ms. The sensor supports a maximum switching voltage of 250 V AC/DC, and a minimum switching voltage of 5 V (at 10 mA). It has a limiting continuous current of 8 A, with a maximum inrush current of 12 A (20 ms), and a minimum switching current of 10 mA (At 5 V). The interrupting rating for ohmic loads is 190 W (at 24 V DC). The connection method is via a Plug / solder connection, with a degree of protection rated at RT II. The sensor operates reliably in ambient temperatures ranging from -40 °C ... 85 °C. Capture the Best Deal with a Quote for your requirement of Phoenix Input Voltage 48 V DC Single Relay. Our pricing and support are designed to exceed the standards of other Traders & Suppliers.