REL-OR3/LDP-220DC/3X21: 2907027 - Phoenix 3 Change-over Contacts Single Relay
Technical Specifications of Phoenix 3 Change-over Contacts Single Relay REL-OR3/LDP-220DC/3X21 2907027:
| Spec | Value |
|---|---|
| Product Type | Single relay |
| Mechanical service life | 1x 107 cycles, approximately |
| Nominal input voltage UN | 220 V DC |
| Input voltage range | 187 V DC ... 242 V DC |
Phoenix 3 Change-over Contacts Single Relay REL-OR3/LDP-220DC/3X21, 2907027 Technical Specifications:
| Specification | Value |
|---|---|
| Product type | Single relay |
| Mechanical service life | 1x 107 cycles, approximately |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 3 |
| Service life electrical | - |
| Maximum power dissipation for nominal condition | 1.76 W |
| Test voltage (Winding/contact) | 2.5 kVrms (50 Hz, 1 min., winding/contact) |
| Test voltage (Changeover contact/changeover contact) | 2 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 4 kV |
| Nominal input voltage UN | 220 V DC |
| Input voltage range | 187 V DC ... 242 V DC |
| Drive and function | monostable |
| Drive (polarity) | polarized |
| Typical input current at UN | 8 mA |
| Typical response time | 7 ms |
| Coil voltage | - |
| Status display | LED (yellow) |
| Contact switching type | 3 changeover contacts |
| Type of switch contact | Single contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 10 V (At 24 mA) |
| Limiting continuous current | 10 A |
| Maximum inrush current | 30 A (20 ms, N/O contacts) |
| Min. switching current | 10 mA (at 24 V) |
| Interrupting rating (ohmic load) max. | 240 W (at 24 V DC) |
| Connection method | Plug-in connection |
| Width | 35 mm |
| Height | 35 mm |
| Depth | 54.4 mm |
| Degree of protection | RT I |
| Degree of protection (Installation location) | - |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Standards/regulations | IEC 60664 |
| Mounting type | - |
| Mounting position | any |
| Mains frequency | - |
| Typical release time range | - |
| Coil resistance | - |
| Switching capacity | 2 A (at 24 V, DC13) |
| Motor load according to UL 508 | - |
| Input power dissipation for UN | - |
| 3-phase motor load | - |
| Product family | - |
| Relay type | - |
| Test voltage () | - |
| Degree of protection (Relay) | - |
| Inrush current, minimum | - |
| Non-operate voltage | - |
| Safe operate voltage | - |
| Test voltage (N/O contact / N/O contact) | - |
Give Us a Call for Phoenix 3 Change-over Contacts Single Relay REL-OR3/LDP-220DC/3X21 part no: 2907027 at the lowest pricing. In-depth Technical Analysis of REL-OR3/LDP-220DC/3X21, 2907027 feature mechanical service life of 1x 107 cycles, approximately, designed for demanding industrial applications. The sensor operates at a nominal input voltage of 220 V DC, with an input voltage range of 187 V DC ... 242 V DC. The typical input current at UN is 8 mA with a response time of 18 ms. The sensor supports a maximum switching voltage of 250 V AC/DC, and a minimum switching voltage of 10 V (At 24 mA). It has a limiting continuous current of 10 A, with a maximum inrush current of 30 A (20 ms, N/O contacts), and a minimum switching current of 10 mA (at 24 V). The interrupting rating for ohmic loads is 240 W (at 24 V DC). The connection method is via a Plug-in connection, with a degree of protection rated at RT I. The sensor operates reliably in ambient temperatures ranging from -40 °C ... 70 °C. Elevate Your Project with a Quote for your requirement of Phoenix 3 Change-over Contacts Single Relay. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
