ATV212HD18N4 - Schneider Electric 25 HP VFD
ATV212HD18N4 Schneider Electric 25 HP VFD
| Spec | Value |
|---|---|
| Brand | Schneider |
| Product Type | VFD(Variable Frequency Drive) |
| Product | ATV212HD18N4 |
🛠️ Get Quotes Instantly from Schneider Vendors
ATV212HD18N4 Schneider Electric 25 HP VFD Technical Specifications:
| Specification | Value |
|---|---|
| Connector Type | 1 open style1 RJ45 |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Motor power range AC-3 | 15…25 kW at 380…440 V 3 phases15…25 kW at 480…500 V 3 phases |
| Net weight | 11.65 kg |
| Switching frequency | 6...16 kHz adjustable8...16 kHz with derating factor |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323…528 V |
| Operating position | Vertical +/- 10 degree |
| Discrete input type | F programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm |
| Speed range | 1…10 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| IP degree of protection | IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529 |
| Power dissipation in W | 603 W |
| Network frequency | 47.5...63 Hz |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 25 mm² / AWG 3 |
| EMC filter | Class C2 EMC filter integrated |
| Motor starter type | Variable speed drive |
| Depth | 190 mm |
| Range of product | Altivar 212 |
| Nominal switching frequency | 8 kHz |
| Discrete output type | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 3200 sAutomatic based on the load |
| Warranty | 18 months |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Display unit: 0.1 HzAnalog input: 0.024/50 Hz |
| Tightening torque | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)4.5 N.m, 40 lb.in (L1/R, L2/S, L3/T) |
| Transmission rate | 9600 bps or 19200 bps |
| Assembly style | With heat sink |
| Motor power hp | 25 hp |
| Dielectric strength | 3535 V DC between earth and power terminals5092 V DC between control and power terminals |
| Regulation loop | Adjustable PI regulator |
| Speed drive output frequency | 0.5…200 Hz |
| Analogue output type | FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bitsFM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits |
| Analogue input type | VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable PTC probe: 0...6 probes, impedance: 1500 OhmVIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits |
| Ambient air temperature for storage | -25…70 °C |
| Type of cable | Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPRWithout mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVCWith UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC |
| Type of polarization | No impedance |
| Motor power kW | 18.5 kW |
| Variable speed drive application selection | Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump |
The ATV212HD18N4 supports an adjustable switching frequency from 6…16 kHz, and maintains operational efficiency within a wide supply voltage range of 323–528 V. The device features IP20/IP21/IP41 protection, 0.5–200 Hz output frequency, and supports analog and digital I/Os for flexible connectivity. Its compact build (depth: 190 mm) and net weight of 11.65 kg make it suitable for space-constrained installations. Key functions like automatic acceleration/deceleration ramps and adjustable PI control loops enhance process stability and motor lifespan.
Trusted by engineers and facility managers across sectors, the Schneider Electric ATV212HD18N4 is ideal for pumps, fans, and HVAC scroll compressors. It’s backed by an 18-month warranty and complies with global industrial standards (IEC 61800-5-1, IEC 60529). If you’re sourcing a robust 25 HP drive with reliable thermal management and seamless system integration, request a quote now. Explore more Schneider VFDs or get pricing for ATV212HD18N4 on IndMALL.
Chat with Us