ATV310HU75N4E: Schneider 10HP VFD
Technical Specifications of Schneider 10HP VFD ATV310HU75N4E:
| Spec | Value |
|---|---|
| Minimum switching current | 5 mA at 24 V DC for logic relay |
| Output voltage | 380...460 V three phase |
| Switching frequency | 2...12 kHz adjustable |
| Nominal switching frequency | 4 kHz |
Schneider 10HP VFD ATV310HU75N4E Technical Specifications:
| Specification | Value |
|---|---|
| Minimum switching current | 5 mA at 24 V DC for logic relay |
| Analogue output number | 1 |
| Height | 232 mm |
| Speed drive output frequency | 0.5…400 Hz |
| Unit Type of Package 2 | S04 |
| Time constant | 20 ms +/- 1 ms for reference change |
| Operating altitude | <= 1000 m without derating |
| Number of addresses | 1…247 for Modbus |
| Supply frequency | 50/60 Hz +/- 5 % |
| Device short name | ATV310 |
| Acceleration and deceleration ramps | Linear from 0...999.9 sSU |
| Speed range | 1…20 for asynchronous motor |
| Physical interface | 2-wire RS 485 for Modbus |
| Product or component type | Variable speed drive |
| Ambient air temperature for storage | -25…70 °C |
| Analogue input number | 1 |
| Output voltage | 380...460 V three phase |
| Continuous output current | 17 A heavy duty22.8 A normal duty |
| Package 2 Weight | 8.956 kg |
| Asynchronous motor control profile | Voltage/frequency ratio (V/f)Voltage/frequency ratio - Energy Saving, quadratic U/fSensorless vector control (SVC) |
| Electrical connection | Terminal, clamping capacity: 6...10 mm², AWG 10...AWG 7 (L1, L2, L3, PA/+, PB, U, V, W) |
| Maximum switching current | 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
| Electromagnetic compatibility | Electrical fast transient/burst immunity test - test level: level 4 conforming to IEC 61000-4-4Electrostatic discharge immunity test - test level: level 3 conforming to IEC 61000-4-2Immunity to conducted disturbances - test level: level 3 conforming to IEC 61000-4-6Radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to IEC 61000-4-3Voltage dips and interruptions immunity test conforming to IEC 61000-4-11Surge immunity test - test level: level 3 conforming to IEC 61000-4-5 |
| Motor slip compensation | Adjustable |
| Supply | Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protectionInternal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection |
| Braking torque | Up to 150 % of nominal motor torque with braking resistorUp to 70 % of nominal motor torque without braking resistor |
| Number of Units in Package 1 | 1 |
| Width | 150 mm |
| Package 1 Weight | 2.150 kg |
| Range of product | Easy Altivar 310 |
| Depth | 171 mm |
| Operating position | Vertical +/- 10 degree |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Communication service | Read holding registers (03) 29 wordsWrite single register (06) 29 wordsWrite multiple registers (16) 27 wordsRead/write multiple registers (23) 4/4 wordsRead device identification (43) |
| Quantity per set | Set of 1 |
Call us for the best rates on the Schneider 10 HP VFD ATV310HU75N4E. This model features a minimum switching current of 5 mA at 24 V DC for logic relay control and supports a flexible speed drive output frequency range of 0.5…400 Hz, suitable for various industrial applications. It has a response time for reference changes of 20 ms +/- 1 ms, operating at a supply frequency of 50/60 Hz with a +/- 5 % tolerance. The VFD is designed to support a speed range of 1…20 for asynchronous motors, with a 2-wire RS 485 interface for Modbus communication. It operates at an output voltage of 380...460 V in a three-phase configuration, with a continuous output current of 17 A for heavy-duty and 22.8 A for normal duty applications. The switching frequency is adjustable from 2...12 kHz, with a nominal frequency of 4 kHz, and it includes an RJ45 connector on the front for convenient Modbus access. Reach out for an exclusive quote on the Schneider 10 HP VFD, and experience competitive pricing and exceptional support that exceeds other dealers.
