BMXP3420102: Schneider M340 Processor Module
Technical Specifications of Schneider M340 Processor Module BMXP3420102:
| Spec | Value |
|---|---|
| Analogue I/O processor capacity | 256 I/O multi-rack configuration66 I/O single-rack configuration |
| Product Component Type | Processor module |
| Current Consumption | 90 mA at 24 V DC |
| Supply | Internal power supply via rack |
Schneider M340 Processor Module BMXP3420102 Technical Specifications:
| Specification | Value |
|---|---|
| Bus length | 0…10 m serial link non isolated character mode segment0…10 m serial link non isolated Modbus segment0…1000 m serial link isolated character mode segment0…1000 m serial link isolated Modbus segment0…15 m character mode point-to-point0…15 m Modbus point-to-point |
| Number of addresses | 0…248 for character mode0…248 for Modbus |
| Execution time per instruction | 0.12 µs Boolean0.17 µs double-length words0.25 µs single-length words1.16 µs floating points |
| Number of slots | 11 |
| Maximum size of object areas | 256 kB unlocated internal data32634 %Mi located internal bits |
| Analogue I/O processor capacity | 256 I/O multi-rack configuration66 I/O single-rack configuration |
| Memory description | Supplied memory card (BMXRMS008MP) backup of programs, constants, symbols and dataInternal RAM 4096 kBInternal RAM 256 kB dataInternal RAM 3584 kB program constants and symbols |
| Transmission rate | 1 Mbit/s 0…20 m 0…0.6 m125 kbit/s 0…500 m 0…10 m20 kbit/s 0…2500 m 0…300 m250 kbit/s 0…250 m 0…10 m50 kbit/s 0…1000 m 0…120 m500 kbit/s 0…100 m 0…10 m800 kbit/s 0…40 m 0…6 m |
| Communication module processor capacity | 2 Ethernet communication module4 AS-Interface module |
| Integrated connection type | Non isolated serial link RJ45 character mode, transmission mode: asynchronous in baseband, RS232C, transmission mode: 2 twisted shielded pairs at 0.3...19.2 kbit/s full duplexNon isolated serial link RJ45 character mode, transmission mode: asynchronous in baseband, RS485, transmission mode: 1 twisted shielded pair at 0.3...19.2 kbit/s half duplexNon isolated serial link RJ45, master/slave Modbus, RTU/ASCII, transmission mode: asynchronous in baseband, RS232C, transmission mode: 1 twisted shielded pair at 0.3...19.2 kbit/s half duplexNon isolated serial link RJ45, master/slave Modbus, RTU/ASCII, transmission mode: asynchronous in baseband, RS485, transmission mode: 1 twisted shielded pair at 0.3...19.2 kbit/s half duplexUSB port at 12 Mbit/sCANopen master bus SUB-D 9, transmission mode: 2 twisted shielded pairs at 20 kbit/s...1 Mbit/s |
| Number of racks | 4 |
| Product or component type | Processor module |
| Current consumption | 90 mA at 24 V DC |
| Number of devices | 2 point-to-point character mode2 point-to-point Modbus |
| Bus type | CANopen M20 DS 301 V4.02 devices linked by daisy-chaining or tap junctions CSMA/CACANopen M20 DS 303-2 devices linked by daisy-chaining or tap junctions CSMA/CACANopen M20 DS 405 devices linked by daisy-chaining or tap junctions CSMA/CA |
| IP degree of protection | IP20 |
| Status LED | 1 LED (green) integrated machine/installation bus operational (CAN RUN)1 LED (green) processor running (RUN)1 LED (red) I/O module fault (I/O)1 LED (red) integrated machine/installation bus fault (CAN ERR)1 LED (red) memory card fault (CARD ERR)1 LED (red) processor or system fault (ERR)1 LED (yellow) activity on Modbus (SER COM) |
| Number of application specific channel | 36 |
| Number of instructions per ms | 6.4 Kinst/ms 65 % Boolean + 35 % fixed arithmetic8.1 Kinst/ms 100 % Boolean |
| Relative humidity | 10…95 % without condensation |
| Net weight | 0.21 kg |
| Embedded communication service | Network management (NMT) CANopenProcess Data Object (PDO) CANopenService Data Object (SDO) CANopenSpecial functions (SYNC, EMCY, TIME) CANopen |
| Range of product | Modicon M340 automation platform |
| Supply | Internal power supply via rack |
| Ambient air temperature for operation | 0…60 °C |
| Monitoring | Diagnostic counters ModbusEvent counters Modbus |
| Motion control | Independent axis CANopen |
Mail Us for your needs in Schneider M340 Processor Module BMXP3420102 with budget-friendly prices. The Main Technical Parameters of BMXP3420102 include Modicon M340 automation platform, ideal for high-performance industrial control. This Processor module supports 256 I/O multi-rack configuration66 I/O single-rack configuration setup, providing flexibility for large systems. The sensor also handles Programmable loops for enhanced control capabilities. The package 2 weight is 4.058 kg, and the height is 15.000 cm, ensuring a compact design suitable for tight spaces. With a current consumption of 90 mA at 24 V DC, the sensor is energy-efficient. The power is supplied Internal power supply via rack. Customize Your Experience with a Quote for your requirement of Schneider M340 Processor Module. Experience the difference with our competitive pricing and superior support over other Suppliers.
Related Products
