LC1E160F5: Schneider 160A Easy TeSys 110V AC 3P Contactor
Technical Specifications of Schneider 160A Easy TeSys 110V AC 3P Contactor LC1E160F5:
| Spec | Value |
|---|---|
| Product Component Type | Contactor |
| [Ue] rated operational voltage | Power circuit: <= 690 V AC 50/60 Hz |
| Power Dissipation Per Pole | 24 W AC-115 W AC-3 |
| Tightening Torque | Power circuit: 12 N.mControl circuit: 1.2 N.m |
Schneider 160A Easy TeSys 110V AC 3P Contactor LC1E160F5 Technical Specifications:
| Specification | Value |
|---|---|
| Range | Easy TeSys |
| Range of product | Easy TeSys Control |
| Product or component type | Contactor |
| Poles description | 3P |
| [Ue] rated operational voltage | Power circuit: <= 690 V AC 50/60 Hz |
| [Ie] rated operational current | 160 A (at <55 °C) at <= 440 V AC AC-3 for power circuit200 A (at <55 °C) at <= 440 V AC AC-1 for power circuit |
| [Uc] control circuit voltage | 110 V AC 50 Hz |
| Motor power kW | 45 kW at 220...230 V AC 50/60 Hz75 kW at 380...400 V80 kW at 415 V80 kW at 440 V90 kW at 500 V100 kW at 660...690 V |
| Pole contact composition | 3 NO |
| [Ith] conventional free air thermal current | 200 A (at 40 °C) |
| Irms rated making capacity | 1600 A at 440 V AC for power circuit conforming to IEC 60947-4-1 |
| Rated breaking capacity | 1280 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 1400 A 40 °C - 10 s for power circuit |
| Associated fuse rating | 10 A gG at <= 690 V coordination type 1 for control circuit conforming to IEC 60947-5-1315 A gG at <= 690 V coordination type 1 for power circuit |
| Power dissipation per pole | 24 W AC-115 W AC-3 |
| [Ui] rated insulation voltage | 690 V conforming to IEC 60947-4-1 |
| [Uimp] rated impulse withstand voltage | 8 kV coil not connected to the power circuit conforming to IEC 60947 |
| Control circuit type | AC at 50 Hz |
| Control circuit voltage limits | 0.85...1.1 Uc (-5…55 °C):operational 50 Hz0.35...0.55 Uc (-5…55 °C):drop-out 50 Hz |
| Inrush power in VA | 300 VA 50 Hz cos phi 0.9 (at 20 °C)300 VA 60 Hz cos phi 0.9 (at 20 °C) |
| Hold-in power consumption in VA | 22 VA 50 Hz cos phi 0.9 (at 20 °C)22 VA 60 Hz cos phi 0.9 (at 20 °C) |
| Heat dissipation | 3…8 W for control circuit |
| Operating time | 20...50 ms on closing6...20 ms on opening |
| Maximum operating rate | 1200 cyc/h 55 °C |
| Connections - terminals | Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable endPower circuit: screw clamp terminals 1 10…120 mm² - cable stiffness: flexible with cable endPower circuit: screw clamp terminals 1 10…120 mm² - cable stiffness: solid without cable endControl circuit: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible without cable endControl circuit: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible with cable endControl circuit: screw clamp terminals 1 1…2.5 mm² - cable stiffness: solid without cable endControl circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: solid without cable endPower circuit: screw clamp terminals 2 10…120 mm² - cable stiffness: flexible with cable endPower circuit: screw clamp terminals 2 10…120 mm² - cable stiffness: solid without cable end |
| Tightening torque | Power circuit: 12 N.mControl circuit: 1.2 N.m |
| Auxiliary contact composition | 1 NO + 1 NC |
| Minimum switching voltage | 17 V for control circuit |
| Minimum switching current | 5 mA for control circuit |
| Mounting support | DIN railPlate |
| IP degree of protection | IP2X conforming to IEC 60529 |
| Height | 158 mm |
| Width | 120 mm |
| Depth | 132 mm |
| Net weight | 2.3 kg |
Send Your Inquiry for Schneider 160A Easy TeSys 110V AC 3P Contactor LC1E160F5 with cost-effective solutions. Essential Technical Specs of LC1E160F5 are Easy TeSys Control Range of products and the Contactor Product or component type 3P, designed for efficient performance in Power circuit: <= 690 V AC 50/60 Hz. This product features a rated operational current of 160 A (at <55 °C) at <= 440 V AC AC-3 for power circuit200 A (at <55 °C) at <= 440 V AC AC-1 for power circuit. It operates at a control circuit voltage of 110 V AC 50 Hz, with 3 NO poles. The conventional free air thermal current is rated at 200 A (at 40 °C), and power dissipation per pole is 24 W AC-115 W AC-3. The rated insulation voltage is 690 V conforming to IEC 60947-4-1, and the impulse withstand voltage is 8 kV coil not connected to the power circuit conforming to IEC 60947. Capture the Best Deal with a Quote for your requirement of Schneider 160A Easy TeSys 110V AC 3P Contactor. Our pricing and support are designed to exceed the standards of other Traders & Suppliers.
Related Products
