Telemecanique 9012GAWM4H3 Electromechanical Pressure Switch
+91 79955 44066 sales@indmall.in

Telemecanique 9012GAWM4H3 Electromechanical Pressure Switch

Technical Specifications of Telemecanique Pressure Switch 9012GAWM4H3:

SpecValue
Pressure sensor typeElectromechanical pressure switch
240 psiMaximum pressure
Terminal block type4 screw terminals
NEMA degree of protectionNEMA 4/4X/13 conforming to UL 50

Telemecanique Electromechanical Pressure Switch 9012GAWM4H3 Technical Specifications

SpecificationValue
Pressure sensor typeElectromechanical pressure switch
Pressure sensor name9012G
Maximum pressure240 psi
Contacts type and compositionNC-NO, SPDT-DB, Form Z, snap action, silver nickel contacts
Controlled fluidHydraulic oil (-40-250 °F), non-corrosive liquids (-40-250 °F), air (-40-250 °F), non-corrosive gas (-40-250 °F)
Fluid connection type0.25 inch BS2779 parallel pipe thread conforming to UL 508
Pressure switch type of operationRegulation between 2 thresholds
Scale typeAdjustable differential
Local displayWithout
Cable entry20 mm BS4568 conduit entrance
Terminal block type4 screw terminals
Electrical connectionScrew-clamp terminals, AWG 22...AWG 12
Electrical circuit typeControl circuit
Local signallingWithout:
SettingInternal
Enclosure materialDie cast aluminium alloy 380
Pressure actuatorDiaphragm nitrile (Buna-N)
Operating positionAny position
Materials in contact with fluidNitrile (Buna-N)
Operating rate120 cyc/mn
Vibration resistance2 gn (f= 40-150 Hz) conforming to IEC 68-2-6
Shock resistance50 gn conforming to IEC 58-2-27
NEMA degree of protectionNEMA 4/4X/13 conforming to UL 50
Get A Quote for Telemecanique 9012GAWM4H3 Electromechanical Pressure Switch at unbeatable prices. This switch features a maximum pressure capacity of 240 psi and operates with a Regulation between 2 thresholds. It has an Adjustable differential scale and uses NC-NO, SPDT-DB, Form Z, snap action, silver nickel contacts for reliable performance. Key specifications include fluid connection 0.25 inch BS2779 parallel pipe thread conforming to UL 508 standards, an 4 screw terminals block, and Screw-clamp terminals, AWG 22...AWG 12 wires. The cable entry is a 20 mm BS4568 conduit entrance, and the Diaphragm nitrile (Buna-N) Pressure actuator, with Die cast aluminium alloy 380 insulation for contact durability. It also features Nitrile (Buna-N) materials for fluid contact and an operating rate of 120 cyc/mn. Match Your Needs with a Quote for your requirement of Telemecanique 9012GAWM4H3 Electromechanical Pressure Switch. Our pricing and support are unrivaled, especially when compared to other Distributors.